Just a reminder to all that we do have an Automotive Calculations section on CamaroZ28.Com. We've had this online for the last couple of years. Some of the high end calculations include Aerodynamic and Rolling Horsepower Calculation, Air Drag Coefficients and Frontal Area Calculation, Compression Ratio HP Change Calculation, Fuel Injector Sizing Calculation, and LOTS more.

Check it out at https://www.camaroz28.com/calcs/index.shtml

 

Very cool..Thanks Chris


Cody

 

Very very nice!!! Good to know.

 

Don't know how I missed that. Lots of good stuff there

 

Vehicle Acceleration Simulation (Automatic Trans)

anyone get it to work ???

seems to freeze at only a few lines of output

 

>I used it

 

bowtiepwr , are you seeing more Info/Results than this ???

Bowling's Vehicle Acceleration Dynamic Simulation
Code Still Experimental, be warned...
-------------------------------------------------------------------
Time Xmisn Eng Pos MPH Eng Accel RearWheel Weight FrontEnd
(s) Gear# RPM (ft) HP Slip RearWheel Lifted
-------------------------------------------------------------------
0.050 1 3000.0 0.0 0.0 184 0.00 No 2010.1 No


Run Summary:
-----------
60 Foot Time: 0.000
Final ET: 0.052
Final MPH: nan

 

ET_Analyst for DragRacers computer program

go to my Website to download the free,
fully-functional ET_Analyst for DragRacers 1.0

DOS-mouse supported version

includes 29 RaceCar files :
4.486 ET Top Fuel Dragster
6.670 ET ProStock Car record run
and more

http://www.maxracesoftware.com/race_car_physics.htm

 

We are trying to build our cars to be on the cutting edge, but we are forced to use software forced on us by companies that are using old dead operating systems. DOS and windows are dead! If we can't trust these companies to at the very least stay up to date, How can we trust the info we get out of their antique software. When will we see UNIX software that will run on any platform and on our networks?