tranny leak..
Thread Starter
Registered User
Joined: Jan 2002
Posts: 134
From: alden,ny
tranny leak..
alright, i finally get me car going.. and now i have a bad tranny leak. well i took a shot and replaced the tranny pan gasket., well that was a no go. still leaking good!.
and its not leaking from the lines into the tranny itself.. but somewheres its leaking.
theres fluid on my y-pipe,(which burns up and smokes bad). and its on the starter!.. i cant seem to find the leak!. i thought it may be my front seal. but theres no fluid on the converter. well i donno, if anyone has any ideas as to what i can do to find out what it is. let me know!> thanks
shaun
------------------
1987 IROC-Z
355ci, Dart 2.02x1.60, compete forged bottom end, SLP siamesed runners, fully ported Edelbrock manifold and plenum, 58mm TB, Accel 26lb Injectors, Edelbrock headers & y-pipe, Flowmaster 3" cat-back, Rebuilt 700r4, B&M Megashifter, Holley 255lph fuel pump, triple guage pod, !A/C & Heat, !Smog pump, bypassed TB, MJS Ram air, custom PROM, Lakewood control lower control arms, Lakewood adjustable pan hard, Sub-Frames, Hotchkis Strut tower brace, Adjustable Torque Arm, 150hp NOS
IROC Pix
and its not leaking from the lines into the tranny itself.. but somewheres its leaking.
theres fluid on my y-pipe,(which burns up and smokes bad). and its on the starter!.. i cant seem to find the leak!. i thought it may be my front seal. but theres no fluid on the converter. well i donno, if anyone has any ideas as to what i can do to find out what it is. let me know!> thanks
shaun
------------------
1987 IROC-Z
355ci, Dart 2.02x1.60, compete forged bottom end, SLP siamesed runners, fully ported Edelbrock manifold and plenum, 58mm TB, Accel 26lb Injectors, Edelbrock headers & y-pipe, Flowmaster 3" cat-back, Rebuilt 700r4, B&M Megashifter, Holley 255lph fuel pump, triple guage pod, !A/C & Heat, !Smog pump, bypassed TB, MJS Ram air, custom PROM, Lakewood control lower control arms, Lakewood adjustable pan hard, Sub-Frames, Hotchkis Strut tower brace, Adjustable Torque Arm, 150hp NOS
IROC Pix
Thread Starter
Registered User
Joined: Jan 2002
Posts: 134
From: alden,ny
where is the pump seal? on the 700r4.
and i only see fluid on passenger side, and on the front of the pan...ill look at that though as soon as i find out what it looks like, and where it is. thanks.
later
shaun
------------------
1987 IROC-Z
355ci, Dart 2.02x1.60, compete forged bottom end, SLP siamesed runners, fully ported Edelbrock manifold and plenum, 58mm TB, Accel 26lb Injectors, Edelbrock headers & y-pipe, Flowmaster 3" cat-back, Rebuilt 700r4, B&M Megashifter, Holley 255lph fuel pump, triple guage pod, !A/C & Heat, !Smog pump, bypassed TB, MJS Ram air, custom PROM, Lakewood control lower control arms, Lakewood adjustable pan hard, Sub-Frames, Hotchkis Strut tower brace, Adjustable Torque Arm, 150hp NOS
IROC Pix
and i only see fluid on passenger side, and on the front of the pan...ill look at that though as soon as i find out what it looks like, and where it is. thanks.
later
shaun
------------------
1987 IROC-Z
355ci, Dart 2.02x1.60, compete forged bottom end, SLP siamesed runners, fully ported Edelbrock manifold and plenum, 58mm TB, Accel 26lb Injectors, Edelbrock headers & y-pipe, Flowmaster 3" cat-back, Rebuilt 700r4, B&M Megashifter, Holley 255lph fuel pump, triple guage pod, !A/C & Heat, !Smog pump, bypassed TB, MJS Ram air, custom PROM, Lakewood control lower control arms, Lakewood adjustable pan hard, Sub-Frames, Hotchkis Strut tower brace, Adjustable Torque Arm, 150hp NOS
IROC Pix
Thread Starter
Registered User
Joined: Jan 2002
Posts: 134
From: alden,ny
well i got the tranny out. and the front seal has no cracks or anything from what i can see.. i looked over the tranny and visually i cant seem to find where it would be coming from!. i guess monday or sometime during the week ill get it over to a shop and have them look at it.
Thread Starter
Registered User
Joined: Jan 2002
Posts: 134
From: alden,ny
how much do you guys think it is going to cost me to have a place check it out, and re-gasket the tranny?
thanks guys.
and if it STILL leaks what should i replace next?..
later
shaun
------------------
1987 IROC-Z
355ci, Dart 2.02x1.60, compete forged bottom end, SLP siamesed runners, fully ported Edelbrock manifold and plenum, 58mm TB, Accel 26lb Injectors, Edelbrock headers & y-pipe, Flowmaster 3" cat-back, Rebuilt 700r4, B&M Megashifter, Holley 255lph fuel pump, triple guage pod, !A/C & Heat, !Smog pump, bypassed TB, MJS Ram air, custom PROM, Lakewood control lower control arms, Lakewood adjustable pan hard, Sub-Frames, Hotchkis Strut tower brace, Adjustable Torque Arm, 150hp NOS
IROC Pix
thanks guys.
and if it STILL leaks what should i replace next?..
later
shaun
------------------
1987 IROC-Z
355ci, Dart 2.02x1.60, compete forged bottom end, SLP siamesed runners, fully ported Edelbrock manifold and plenum, 58mm TB, Accel 26lb Injectors, Edelbrock headers & y-pipe, Flowmaster 3" cat-back, Rebuilt 700r4, B&M Megashifter, Holley 255lph fuel pump, triple guage pod, !A/C & Heat, !Smog pump, bypassed TB, MJS Ram air, custom PROM, Lakewood control lower control arms, Lakewood adjustable pan hard, Sub-Frames, Hotchkis Strut tower brace, Adjustable Torque Arm, 150hp NOS
IROC Pix
Thread
Thread Starter
Forum
Replies
Last Post