rear end

Reply Subscribe

Thread Tools

Search this Thread

Aug 16, 2010 | 02:59 PM

anthony22893

Thread Starter

Registered User

Joined: Jun 2010

Posts: 58

From: 757, virginia

rear end

would a 1995 CAMARO/Z28 3.23 POSI fit in my 1985 z28?

Aug 16, 2010 | 09:15 PM

quickchicken

Registered User

Joined: Mar 2002

Posts: 381

From: Byhalia Ms, just south of Memphis

yup, but the wheels will stick out right at the edges of the fender well. the 4th gen rears are 2" wider than a third gen 10 bolt.

Aug 18, 2010 | 01:31 AM

anthony22893

Thread Starter

Registered User

Joined: Jun 2010

Posts: 58

From: 757, virginia

my dad said it woulnt bolt up or something.

Aug 18, 2010 | 08:03 AM

quickchicken

Registered User

Joined: Mar 2002

Posts: 381

From: Byhalia Ms, just south of Memphis

it'll bolt right up. brake plates will be diff being they went with the PBR design.

4th gen rear swaps are very common, do a search over on TGO and you'll see.

Aug 20, 2010 | 05:05 PM

anthony22893

Thread Starter

Registered User

Joined: Jun 2010

Posts: 58

From: 757, virginia

are the brake plate expensive?

Aug 20, 2010 | 05:35 PM

quickchicken

Registered User

Joined: Mar 2002

Posts: 381

From: Byhalia Ms, just south of Memphis

if you can find a complete rear including brakes this would make upgrading a snap. just find a car with disk from 89+ and get the proportioning valve and you will be set. Hawks will have the prop valve needed.