As my previous thread explains, I am looking for a cam. I found this one on Ebay but know nothing about it.

http://cgi.ebay.com/ebaymotors/ws/eB...category=33614

Is this a reasonable alternative between the ZZ4 and the HotCam?

Jim

 

That camshaft is ridiculously small. The LT4 hot cam isnt that big either. Let us know the specs of the motor it is going in and we can further help you out.

 

350 ci, SLP headers, Siamesed runners, Bigmouth base, stock gears for a 1992 Z28 and trick 700R4.

I am going to install the cam along with Vortec heads and manifold. I plan to port and match the heads, manifold and runners as well as open the runners and plenium a bit.

Jim

 

The vehicle is a 92' Z28

 

That LT4 cam is what came stock in the 330 horsepower LT4 engines from 1996 Corvettes and some 1997 F-bodies. It is a decent cam if you want a mild engine. If you're looking for more power, you'll want something bigger. But this cam will idle like stock and give you a great kick in the pants.

By the way, a stock 1992 Camaro Z28 with a 350 engine came with dual cats, 4 wheel disc brakes, and the 10-bolt rear end with 3.23 gears.