induction
ytjgfdy
Tuned Port Injection Specialties (T.P.I.S. for short) makes the MiniRam intake. They sell it to you with new fuel rails i believe for just a little over 1000-1100 if I remember correctly.
Accell makes the SuperRam. If you wanted the upper Box with runners, and the base intake piece, it might set you back 1000-1200. Goodlock!
Accell makes the SuperRam. If you wanted the upper Box with runners, and the base intake piece, it might set you back 1000-1200. Goodlock!
When I bought my Mini Ram a few years ago, I paid $895 for the intake an $355 for the fuel rail kit from TPIS. It's big money, but a very nice piece. I was talking to someone last night that said he found the SR plenum and runners for just under $700 brand new. The price of a base manifold would depend on which one you purchased.
Not to mention, if you are patient and do a little searching around you might find a used set up for less than new.
Not to mention, if you are patient and do a little searching around you might find a used set up for less than new.
I have the SuperRam and it ran about $1200.00 new. The MiniRam was about $200.00 more at the time. The MiniRam flows alittle more air and is easier to work on. Also if you are going to use a Supercharger there is less likely to be a vac leak. When having to change injectors you have to pull the top of the Superram. You don't with the MiniRam. There is a pic of my Lingenfelter IROC in the link below with the SuperRam. Check it out.
http://photos.yahoo.com/car_man_i_am

http://photos.yahoo.com/car_man_i_am
Last edited by Chris Ja; Dec 18, 2002 at 05:25 AM.
Thread
Thread Starter
Forum
Replies
Last Post
RUENUF
Cars For Sale
6
Mar 13, 2016 03:37 PM
Cbr02
Parts For Sale
0
Aug 24, 2015 07:12 AM



