My Camaro is basically as stock as you can get it with out any power options. I know I can install actuators in the doors for windows, but here is where the question really comes in.

Is there a way that I can go to a junkyard, thank goodness there is one that specializes in camaro and firebird here in OKC, and set the car up like it would have been at the factory? I am not of the knowing if they use a standard wiring config so that if the car was not fitted with fog lamps or auto windows or door locks they would leave the wiring harness blank for those options or do they use a new structure for the different configurations.

It would sure be nice if they used a generic set up so I can get the window motors and plug them in like they would have been from the factory. I had installed some lock actuators with an alarm and they kept binding up. I would really like to have the standard setup if at all possible.

 

ya, it shouldn't be a problem to add power locks/windows...if that's what you're asking?

 

Yes it is. I really want to stay clear of any jimmy rig style of adding in power windows and door locks even the inside release for the hatch.

I will try to find some details on this.

If you have any links or details they would be appreciated though too.

Thank you in advance...

 

yeah it could a pain in the *** to get all the wiring set up!!