2010 - 2015 Camaro Technical Discussion All 5th Generation Camaro technical discussion that doesn't fit in other forums

MAGNAFLOW - 2010 Camaro Performance Exhaust Systems

Old Jun 28, 2009 | 04:14 PM
  #1  
oxidizr's Avatar
Thread Starter
Registered User
 
Joined: Jun 2009
Posts: 6
MAGNAFLOW - 2010 Camaro Performance Exhaust Systems

MAGNAFLOW has released a myriad of exhaust systems to meet all your RS and SS Exhaust needs.

2.5" and 3.0" complete cat-back systems, 2.5" axle-back systems, 4" Double wall, 5" Rolled edge tips and accomodations for GMPP fascia equipped vehicles. All of these options are available as Street and Competition Series for a mild or wild exhaust note.

2010 Chevrolet Camaro SS (Standard Fascia)


16579 2.5" Street Series Cat-back Performance Exhaust (4" Tips)



16581 2.5" Street Series Axle-back Performance Exhaust






16580 2.5" Competition Series Cat-back Performance Exhaust (5" Tips)



16582 2.5" Competition Series Axle-back Performance Exhaust



2010 Chevrolet Camaro SS (GMPP Fascia)

2.5" Street Series Performance Exhaust System

Stock System with visible inner tip -------------- MAGNAFLOW system with hidden inner tip


Check out www.magnaflow.com for additional information, images, sound clips and dyno charts.

Check out www.camaroz28.com sponsors for pricing ... these systems are IN STOCK!

Richard

Last edited by oxidizr; Jun 30, 2009 at 06:31 PM.
Old Jul 12, 2009 | 06:58 AM
  #2  
JasonD's Avatar
Admin Emeritus
 
Joined: Dec 1997
Posts: 11,157
From: Nashville, TN area
Originally Posted by oxidizr
16580 2.5" Competition Series Cat-back Performance Exhaust (5" Tips)
5 inches in diameter? EYOW!
Old Jul 17, 2009 | 07:42 AM
  #3  
oxidizr's Avatar
Thread Starter
Registered User
 
Joined: Jun 2009
Posts: 6
Street Series comfort and or Competition Series roar

2.5" exhaust or 3.0" exhaust

Cat-back or axle-back

4" tips or 5" tips

All have dyno proven power, stainless steel construction and a lifetime warranty.

Options are good ...
Old Jul 17, 2009 | 03:19 PM
  #4  
SSCamaro99_3's Avatar
Registered User
 
Joined: Apr 2003
Posts: 1,179
From: Ballwin, MO
Does the front muffler case on the cat-back system house a crossover? Any plans for a true x-pipe system with bullet style mufflers?
Old Jul 20, 2009 | 07:14 PM
  #5  
oxidizr's Avatar
Thread Starter
Registered User
 
Joined: Jun 2009
Posts: 6
Originally Posted by SSCamaro99_3
Does the front muffler case on the cat-back system house a crossover? Any plans for a true x-pipe system with bullet style mufflers?
The front muffler contains our Tru-X internal and there is no real reason for bullet mufflers as our straight through mufflers have the same flow properties.

Old Jul 21, 2009 | 03:35 PM
  #6  
SSCamaro99_3's Avatar
Registered User
 
Joined: Apr 2003
Posts: 1,179
From: Ballwin, MO
Thanks for the info. I figured the mufflers flowed very well. That is just a tone preference on my part. Is there packing in the crossover section?

Last edited by SSCamaro99_3; Jul 21, 2009 at 03:38 PM.
Old Jul 28, 2009 | 12:59 AM
  #7  
oxidizr's Avatar
Thread Starter
Registered User
 
Joined: Jun 2009
Posts: 6
Originally Posted by SSCamaro99_3
Thanks for the info. I figured the mufflers flowed very well. That is just a tone preference on my part. Is there packing in the crossover section?
Indeed ... the entire section is steel wool wrapped and then packed with basalt.
Old Aug 21, 2009 | 03:18 PM
  #8  
toegead93's Avatar
Registered User
 
Joined: Jan 2002
Posts: 616
From: West Palm Beach, FL
Is the tru-flow X-pipe sold seperately?
Old Aug 24, 2009 | 08:01 AM
  #9  
2010_5thgen's Avatar
Registered User
 
Joined: Nov 2007
Posts: 4,482
From: ohio
Originally Posted by toegead93
Is the tru-flow X-pipe sold seperately?
depends if you get the cat back or axle back. that x pipe is inside the muffler itself. the picture is showing the inside of the mufflers.
Old Sep 9, 2009 | 05:56 PM
  #10  
toegead93's Avatar
Registered User
 
Joined: Jan 2002
Posts: 616
From: West Palm Beach, FL
I know it comes with the cat back system but I can I buy a tru-x muffler by itself? The picture is showing the inside of the tru-x muffler which is the x-pipe for the system. The diagram is not showing the rear muffler, it is labeled front muffler ie, mufflered x-pipe.
Old May 25, 2010 | 12:00 PM
  #11  
copternadley's Avatar
Registered User
 
Joined: May 2010
Posts: 4
Originally Posted by oxidizr
MAGNAFLOW has released a myriad of exhaust systems to meet all your RS and SS Exhaust needs.

2.5" and 3.0" complete cat-back systems, 2.5" axle-back systems, 4" Double wall, 5" Rolled edge tips and accomodations for GMPP fascia equipped vehicles. All of these options are available as Street and Competition Series for a mild or wild exhaust note.

2010 Chevrolet Camaro SS (Standard Fascia)


16579 2.5" Street Series Cat-back Performance Exhaust (4" Tips)



16581 2.5" Street Series Axle-back Performance Exhaust






16580 2.5" Competition Series Cat-back Performance Exhaust (5" Tips)



16582 2.5" Competition Series Axle-back Performance Exhaust



2010 Chevrolet Camaro SS (GMPP Fascia)

2.5" Street Series Performance Exhaust System

Stock System with visible inner tip -------------- magnaflow system with hidden inner tip


Check out www.magnaflow.com for additional information, images, sound clips and dyno charts.

Check out www.camaroz28.com sponsors for pricing ... these systems are IN STOCK!

Richard
Nice items you got there bro. I wish I have those one. Thumbs up for you bro.

Last edited by copternadley; Jun 3, 2010 at 01:49 PM.
Old Jul 14, 2010 | 08:30 PM
  #12  
Lowridah98's Avatar
Registered User
 
Joined: Feb 2010
Posts: 55
From: Barrie/Kingston Ontario
Will any of these tips fit into the rear diffuser of the ground effects package? dont wanna order a cat back system if they dont fit
Old Aug 6, 2010 | 04:00 PM
  #13  
CHEVY4me's Avatar
Registered User
 
Joined: Aug 2010
Posts: 4
Thumbs up

Nice!
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Jazsun
Cars For Sale
0
Dec 29, 2014 12:14 PM
TheGreenZ28
Exhaust System
0
Dec 6, 2014 10:23 PM
PFYC
Supporting Vendor Group Purchases and Sales
0
Dec 4, 2014 11:56 AM
BIGCOWL-IMP
Midwest
0
Nov 21, 2014 09:40 AM


Thread Tools
Search this Thread

All times are GMT -5. The time now is 04:26 AM.