Anyone know the wheel base? and the tracking width of the front tires?

 

Info like that is not released yet. I suspect it won't be until much closer to the release date that they finalize specific specs such as that.

 

I though so . We were just hopefull. A friends chassis cert. is up in 2010 so just trying to plan ahead. Thanks , ayers1967

 

Expect a longer wheelbase and narrower track than the concept.

 

If someone can get the wheel size on the Mule that could be used as a scale to get a approx length measument.

I Expect they are 19 inch so that might be a starting point.

Anything of known size in the picture can be used as a scale.

 

Just for reference, these are the dimensions on the concept:

WB: 110.5"
Track F/R: 63.8"/63.3"

The 4th gen had a 101.1" WB....they are stretching it out quite a bit!

 

They also knocked off 8 feet of overhang.

 

FWIW, the 1st and 2nd gen Camaros had a 108" wheelbase.

 

I'm not an engineer but from what I've read a certain wheel base increase, helps high speed stability and turning stability.
Maybe not autocrossing but daily driving.
I'm sure there's a sweet spot ratio or something tho I'm not sure what that is...?
BTW, BMW's don't look extremely wide yet corner very well..

 

I'm not sure but i think the m3 is around 108".

A long time ago all the car rags claimed it was the most fun car to drive in the universe.