how much gain from ati procharger

[daddytrav]

does anyone know the approximate horsepower and torque gain from an ati procharger 8psi unit on a stock lt1

[1st and goal]

I never dyno'd my Z before I put my old P600B on but after I installed it it made 405 RWHP / 418 RWTQ.

The best I got it to run with the stock motor and BBK headers, Flowmaster exhaust, SS ram air hood and drag radials was 13.67@ 100.5 and after putting the blower on it ran 12.43 @ 111 on the first pass

Most LT-1's seem to be in the 230-240 RWHP range stock, let's be optimistic and say the exhaust gave an additional 30 hp so figure it was 270ish before the blower so I picked up roughly 135 RHWP on 8#'s of boost so the old saying of ........each pound of boost equals ~20 HP is fairly accurate.

Marc

[tbyrne]

Marc summed it up pretty good. ATI rates the gain for the 8# LT1 kit as being in the 55-60% range. That would show you about a 125-140hp increase.

Tom
T BYRNE MOTORSPORTS - Camaroz28.com sponsor www.tbyrnemotorsports.com

LT1 and LS1 Sales and Service
Order line - 1-877-4-TBYRNE

2002 Supercharged 8.1 Suburban - 14.54 @ 92.43
1998 Z-28- 10.89 @ 130.03 (old combo) - 672hp with ATI and 409

Discounts available on all Vortech and ATI superchargers! E-mail tbyrne@tbyrne.com for pricing.

Check out our 10% off sale!

[Rybar]

My car dynoed with 302 rwhp with bolt ons. After I added the ATI P600B with 8# I dynoed at 415 rwhp and 415 rwtq.

[Ultra_Dog]

I have not dyno'd the car, but let's just say you had better be going in a straight line when boost comes on. A new set of tires may be needed soon.

Also, you will probably be looking at those cool pictures of Baer brakes,since you will be decelerating from 100+MPH considerably more often now.

[ProchargedZ]

I got 406 rwhp and 418 ftlbs up from 278 rwhp and ?? tq. I don't remember what the number was, would have to look so 128 RWHP gain or so