I have a set of hooker shorties I just got in the GP..and dont have the space or experince to do it...and not alot of $$$...anyone thats out there lend me a hand??
Email me


------------------
thanks
David Morgan
the "Over Drive Gang"
94 Z28 A4, K/N FIPK!,AIT Relocator,TB bypass,99 SS MAF Airfoil,HPP+, Shiftkit,Cutout, Flowmaster 80 series American Thunder Exhaust with 3" Chrome tips GMS Strut Tower Brace, GMS Sub Frame Connectors AND 93-96 GM Export Tail Lights! GTS Headlight Covers and Tail covers.

http://overdrive-gang.tripod.com

Check it out !! you might know some of the cars, or my friends.and a few of their rides frequent the pages of muscle car mags

Congrats Tony L. of the "ODG" Owner of The BBC 6SP 81 Malibu

Making Hot Rod Mags top 10 cars of 2001!!

 

If I hadn't just done mine 4 weeks ago, I'd offer you help. I don't want to do that again for a long time. It sucks. It wouldn't be that bad with a lift, but I don't even have a garage.

Good Luck

 

Call Dean at NEdyno.com they have done many sets of headers installs.

Rob

 

try ed at gaunt motor and performance.

he did all the work on my cars. he only gets $45 an hour so it wont be that bad. Even if it takes him 4 -6. 413-562 6969.

bowtie power has gone to him and jeffsworld. they were very happy with his work. he is about 1 hour down the mass pike from boston near west springfield.

------------------
9 second street legal 1989 mustang lx, special effects purple, 306 Vortech t trim 20pds of boost, momo; seats-steering wheel and shifter ****, weld drag lites, stage 2 fuel system, cervini stormin normin hood and saleen wing, tfs ported heads and edelbrock rpm intake, 8pt cage.

new project, 1994 Z28, 383 stroker, 4 bolt block with bullet main caps, cola light weight crank, H beam eagle rods, je inverted pistons 9.2 compression with heads, comp cam custom grind cam and 1.6 non self-aligning rockers, afr stage 2 heads 58cc, fully ported LT1 intake powder coated LT4 red, 3 core race intercooler, polished procharger, 3:73 gears, custom torque arm, eibach springs, custom panhard bar and control arms, kyb agx adjustable shocks, ss hood, factory ss spoiler, 58mm bbk throttlebody, B&M ripper shifter, chrome zr1 rims, autometer phantom gauges, edelbrock headers,

 

I can hook you up if you like. My brother will do it for 25 an hour, which is half what most shops charge.