Is this a good quater mile time for all the mods that i have 12.72 at 112 with a 1.06 reaction time. I ran these times with M/T Street tires.

(Mods listed at the bottom of the page).

 

Sorry dude, but those times suck Well, other then the mph.. which is not bad at all! It shows you have some serious power

What was your 60 ft? I'd be willing to bet it was very high... high 2's, if not higher...

You should be low 12's easy with those mods...

but 60 ft time is gonna say alot!

You have a great setup, now just need to get the power to the ground rather then on your back bumper

jeff

 

Yeah 6 speeds can be tricky to launch. That mph alone is good for low 12's if you can hook it.

 

FWIW, I have ran a 12.48 @ 111.9 with a 1.81 60' time. My car is NA with crappy heads and a CC306 cam.

 

12.9@109 bone stock
12.7@115 lid flp's and a cutout
is your belt slipping?, they have a hard time holding 8psi with the stock pulley

 

My best with a procharger, cam, and headers was a 12.7@115 mph with a 2.1 60ft. That was on street tires

 

Without knowing the weather, elevation, engine condition, & tons of other stuff its hard to say if its good or not.

Ryan

 

FYI- RT has no effect on ET.

-Chris

 

I went 11.31 @121 mph with stock untouched heads and the mods that are in the sig with no nitrous.

 

Looks ok to me, depending on your altitude.

The mph is fine, you are making lots of power.

I ran a best of 12.65 @ 110 mph with stock internals running 10psi of boost, dynoed at 437 at the wheels. A lot is in the 60' time, track conditions .... yada yada yada

Hope this helps

LWM

 

lt1 car? if so that not bad at all. LS1 car something is not right