South Atlantic Delaware, Florida, Georgia, Maryland, North Carolina, South Carolina, Virginia, and West Virginia

running RICH!!! where to take it???

Thread Tools
 
Search this Thread
 
Old Oct 11, 2003 | 08:05 PM
  #1  
1995redZ28's Avatar
Thread Starter
Registered User
 
Joined: May 2001
Posts: 311
From: Orlando, FL
running RICH!!! where to take it???

just wondering where i should take the car to get it looked at, and or possibly tuned. hasnt been running right after hotcam/headers. car kinda stumbles, hesitates, but runs strong at WOT.

the other morning i went out to start my car, and as i was backing out i noticed two huge black spots on the cement, right under where my dual exhaust exits!!!

i know there is a shop by my house but i cant think of the name, i know you guys know it.... there has been a few dyno days there.

just looking for a good shop with LT1 experience around orlando, so i can FINALLY get this car running right!!

anyone????


oh and also.... race rock was def. a great night!!! i might have seen some of you guys driving down I-drive. i know i saw a few fbody's there! and whoever didnt make it this year.... its a MUST next year!!!
Old Oct 12, 2003 | 10:41 AM
  #2  
got_hp?'s Avatar
Registered User
 
Joined: Jun 2002
Posts: 2,456
From: sarasota, fl
call Bret Downs at MASC......hes in orlando, great guy.......im sure he can help ya one way or another......1-877-891-5550
Old Oct 12, 2003 | 11:23 AM
  #3  
Mr. T's Z's Avatar
Registered User
 
Joined: May 2001
Posts: 330
From: Altamonte Springs, FL
Norris Motorsports
Old Oct 12, 2003 | 02:47 PM
  #4  
gixXxinRS's Avatar
Registered User
 
Joined: Mar 2003
Posts: 151
hey , i have a wideband and can do the tuning..

let me know
Old Oct 14, 2003 | 04:17 PM
  #5  
1995redZ28's Avatar
Thread Starter
Registered User
 
Joined: May 2001
Posts: 311
From: Orlando, FL
Norris Motorsports

if i remember correctly i called them about a month ago to talk to them about an oil pressure problem, and i asked them about diagnosing/tuning and they kinda told me they werent interested in helping me out?!

there is another shop locally.... fbody, and vettes mostly, i just cant think of the name, but i know it has held dyno days that you guys have gone to.



gixXxinRS..... where are you located?? do you have a shop, and experience with LT1's?? how much you looking to get to check out my car?? either PM or email back! thanks!!
Old Oct 14, 2003 | 05:53 PM
  #6  
mrr23's Avatar
Registered User
 
Joined: Nov 2001
Posts: 1,151
From: orlando,florida,usa
www.vincihighperformance.com
Old Oct 14, 2003 | 06:17 PM
  #7  
jpaugh's Avatar
Registered User
 
Joined: Dec 1969
Posts: 149
From: Orlando, FL
You must be thinking about Corvette Masters on 17-92. Robbie is an awesome guy. He treats the cars that come in as if they were his own and is a perfectionist. I'm not sure he'll be able to tune the car, but he will be able to do wideband a/f on the dyno. I used his dyno plus PCMFORLESS to get my car tuned after the hotcam install.
Old Oct 15, 2003 | 07:36 PM
  #8  
gixXxinRS's Avatar
Registered User
 
Joined: Mar 2003
Posts: 151
i dont have a shop wish i did but life dont always work out like that..
as for tuning i like tuning at the track, thats where iv gotten the best out of my RS and a few other cars.. its real world tuning.
gives the computer what its gonna see...

rear weight Vs. rollers
moving air vs. a fan(maybe??)


iv done a few cars on here but mostly the lt1 i put in my 92 camaro..

did one for a friend of carters when it was on norris's dyno..
carter if you see this and remember what the dyno was post it plz..

oh and im in sanford.

let me know

Last edited by gixXxinRS; Oct 15, 2003 at 07:40 PM.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
DirtyDaveW
Forced Induction
13
Dec 1, 2016 05:37 PM
Iamherefornow
LT1 Based Engine Tech
2
Jan 26, 2015 04:57 PM
Donwest22
Parts Wanted
0
Dec 12, 2014 05:58 PM
Rich_z28
LT1 Based Engine Tech
13
May 6, 2003 08:38 PM
Speeds8erM-1
Drag Racing Technique
6
Jul 18, 2002 11:36 PM




All times are GMT -5. The time now is 07:12 PM.