2000 Z28 B4C car. Starting 6.0 build. Need lots of parts
#1
Starting 6.0 build. Need lots of parts!
Hello guys
Picked up a 2000 Z28 B4C roller and would like to do a "budget" 6.0L build.
I need lots of parts please take a look and let me know whats avail.
I am willing to pay extra for performace or new parts.
Exterior, interior, drivetrain parts + needed
Thanks!
-This car is an automatic, need a 4l60e with converter, torque arm mount and hardware and trans cooler lines
-LS1/LS6 Intake: stock is great but would consider an aftermarket (bbk, fast etc..)
-Rails and injectors: it would be nice if an aftermarket intake was available with matching rails
-Throttle body: same goes; matching aftermarket with intake
-Alternator bracket and idler pulley
-Water pump with belt tensioner
-Fbody oil pan
-Full exhaust: want to be obnoxiously loud with this build
Looking for SLP loudmouth 1 and CME exhaust
-The car is silver, need a new front bumper cover its cracked bad and ripped in a spot
-Front bumper nose emblem, the one on the car is faded and cracked. Carbon fiber one avail?
-The last thing i can think of for now.. Id like a cowl hood
Thanks for going through my ramblings! lol really excited to get going on this
Please email post or pm
brandon.m.parker.88@gmail.com
Picked up a 2000 Z28 B4C roller and would like to do a "budget" 6.0L build.
I need lots of parts please take a look and let me know whats avail.
I am willing to pay extra for performace or new parts.
Exterior, interior, drivetrain parts + needed
Thanks!
-This car is an automatic, need a 4l60e with converter, torque arm mount and hardware and trans cooler lines
-LS1/LS6 Intake: stock is great but would consider an aftermarket (bbk, fast etc..)
-Rails and injectors: it would be nice if an aftermarket intake was available with matching rails
-Throttle body: same goes; matching aftermarket with intake
-Alternator bracket and idler pulley
-Water pump with belt tensioner
-Fbody oil pan
-Full exhaust: want to be obnoxiously loud with this build
Looking for SLP loudmouth 1 and CME exhaust
-The car is silver, need a new front bumper cover its cracked bad and ripped in a spot
-Front bumper nose emblem, the one on the car is faded and cracked. Carbon fiber one avail?
-The last thing i can think of for now.. Id like a cowl hood
Thanks for going through my ramblings! lol really excited to get going on this
Please email post or pm
brandon.m.parker.88@gmail.com
Last edited by ParkerTPIz; 04-22-2014 at 02:20 PM.
#3
#4
Re: 2000 Z28 B4C car. Starting 6.0 build. Need lots of parts
bump!
Got an LQ4 but still need most of my list.
LS2/LS6 intake, rails, injectors & throttle body.
Fbody water pump, oil pan and alt bracket with idler
Long tube headers with o2 sensors gaskets and hardware
Do I need to run a larger volume fuel pump/set of injectors?
Thanks
Got an LQ4 but still need most of my list.
LS2/LS6 intake, rails, injectors & throttle body.
Fbody water pump, oil pan and alt bracket with idler
Long tube headers with o2 sensors gaskets and hardware
Do I need to run a larger volume fuel pump/set of injectors?
Thanks
Thread
Thread Starter
Forum
Replies
Last Post
Hurin
Suspension, Chassis, and Brakes
4
12-13-2014 07:38 PM