LT1 Engine Parts - Scat, Mahle
09-10-2005, 08:17 PM
#1
Registered User
Thread Starter
Join Date: Mar 2005
Location: Texas
Posts: 92
LT1 Engine Parts - Scat, Mahle
1 set of Scat I-beam rods, 6.0" with 7/16 cap screws. These are the best I-beams that Scat sells (as far as I know). Paid $275, sell for $200 plus shipping. They are new in the box and untouched.
1 set of Mahle 4.030 pistons for use with 6.0" rods. These are very nice pistons, and come with coated tops (and skirts too I think.) Also new and untouched. Paid $485, sell for $400 plus shipping.
With a scat cast steel 383 crank, this makes a great budget assembly.
I am inTexas and could get the stuff from Houston to Dallas personally this month if needed.
1 set of Mahle 4.030 pistons for use with 6.0" rods. These are very nice pistons, and come with coated tops (and skirts too I think.) Also new and untouched. Paid $485, sell for $400 plus shipping.
With a scat cast steel 383 crank, this makes a great budget assembly.
I am inTexas and could get the stuff from Houston to Dallas personally this month if needed.
09-11-2005, 11:06 AM
#2
Registered User
Thread Starter
Join Date: Mar 2005
Location: Texas
Posts: 92
Re: LT1 Engine Parts - Scat, Mahle
Here is the info on the pistons (didn't have this ealier) as they come with matching ring set, which I forgot to mention:
(Flatlanderracing.com now sells these for $555)
The Mahle PowerPak is a complete, race proven piston assembly kit.
It is composed of hand deburred, forged, performance coated pistons, high quality steel pins, round wire locks and low drag performance rings.
Performance coatings include a phosphate dry lubricant that is used to protect against ring micro-welding and pin galling during initial startup and break in. For added performance, MAHLE applies its proprietary Grafel anti-friction coating to each piston skirt.
Part Number SBC125030F05
Piston Kit Features:
* Forged from 4032 low expansion aluminum alloy for high strength and reduced piston to wall clearance.
* Radiused valve pockets.
* Forced pin oiling
* Precision pin fitting and easy to use round wire locks included
* .927" high quality German steel wrist pin (118 grams) included
* Precision ring grooves for INCLUDED 1.5, 1.5, 3.0mm rings.
Bore 4.030
Stroke 3.750
Rod 6.0
Pin Dia .927
Comp Height 1.125
Volume -5cc
Weight 406g
CR w/64cc 11.3
And the rods:
($269 currently from Flatlanderracing.com)
PRO COMP 4340 Forged I-Beam Rods
w/ARP 7/16" Cap Screw Bolts
2-ICR6000-7/16
6.000" Bushed, 8740 Bolts
(Flatlanderracing.com now sells these for $555)
The Mahle PowerPak is a complete, race proven piston assembly kit.
It is composed of hand deburred, forged, performance coated pistons, high quality steel pins, round wire locks and low drag performance rings.
Performance coatings include a phosphate dry lubricant that is used to protect against ring micro-welding and pin galling during initial startup and break in. For added performance, MAHLE applies its proprietary Grafel anti-friction coating to each piston skirt.
Part Number SBC125030F05
Piston Kit Features:
* Forged from 4032 low expansion aluminum alloy for high strength and reduced piston to wall clearance.
* Radiused valve pockets.
* Forced pin oiling
* Precision pin fitting and easy to use round wire locks included
* .927" high quality German steel wrist pin (118 grams) included
* Precision ring grooves for INCLUDED 1.5, 1.5, 3.0mm rings.
Bore 4.030
Stroke 3.750
Rod 6.0
Pin Dia .927
Comp Height 1.125
Volume -5cc
Weight 406g
CR w/64cc 11.3
And the rods:
($269 currently from Flatlanderracing.com)
PRO COMP 4340 Forged I-Beam Rods
w/ARP 7/16" Cap Screw Bolts
2-ICR6000-7/16
6.000" Bushed, 8740 Bolts
Thread
Thread Starter
Forum
Replies
Last Post
oldschool
Parts For Sale
16
02-09-2016 09:21 PM