CamaroZ28.Com Message Board

CamaroZ28.Com Message Board (https://www.camaroz28.com/forums/)
-   Parts For Sale (https://www.camaroz28.com/forums/parts-sale-14/)
-   -   LT1 Engine Parts - Scat, Mahle (https://www.camaroz28.com/forums/parts-sale-14/lt1-engine-parts-scat-mahle-396202/)

gogogadget 09-10-2005 08:17 PM

LT1 Engine Parts - Scat, Mahle
 
1 set of Scat I-beam rods, 6.0" with 7/16 cap screws. These are the best I-beams that Scat sells (as far as I know). Paid $275, sell for $200 plus shipping. They are new in the box and untouched.

1 set of Mahle 4.030 pistons for use with 6.0" rods. These are very nice pistons, and come with coated tops (and skirts too I think.) Also new and untouched. Paid $485, sell for $400 plus shipping.

With a scat cast steel 383 crank, this makes a great budget assembly.

I am inTexas and could get the stuff from Houston to Dallas personally this month if needed.

gogogadget 09-11-2005 11:06 AM

Re: LT1 Engine Parts - Scat, Mahle
 
Here is the info on the pistons (didn't have this ealier) as they come with matching ring set, which I forgot to mention:

(Flatlanderracing.com now sells these for $555)

The Mahle PowerPak is a complete, race proven piston assembly kit.

It is composed of hand deburred, forged, performance coated pistons, high quality steel pins, round wire locks and low drag performance rings.

Performance coatings include a phosphate dry lubricant that is used to protect against ring micro-welding and pin galling during initial startup and break in. For added performance, MAHLE applies its proprietary Grafel anti-friction coating to each piston skirt.

Part Number SBC125030F05

Piston Kit Features:

* Forged from 4032 low expansion aluminum alloy for high strength and reduced piston to wall clearance.
* Radiused valve pockets.
* Forced pin oiling
* Precision pin fitting and easy to use round wire locks included
* .927" high quality German steel wrist pin (118 grams) included
* Precision ring grooves for INCLUDED 1.5, 1.5, 3.0mm rings.

Bore 4.030
Stroke 3.750
Rod 6.0
Pin Dia .927
Comp Height 1.125
Volume -5cc
Weight 406g
CR w/64cc 11.3

And the rods:

($269 currently from Flatlanderracing.com)

PRO COMP 4340 Forged I-Beam Rods
w/ARP 7/16" Cap Screw Bolts
2-ICR6000-7/16
6.000" Bushed, 8740 Bolts

gogogadget 09-11-2005 04:25 PM

Re: LT1 Engine Parts - Scat, Mahle
 
1996LT1NY,

You pm box is full, so I couldn't reply to you about the pistons.

1996LT1NY 09-11-2005 04:48 PM

Re: LT1 Engine Parts - Scat, Mahle
 
Cleared out... Thanks! :)

gogogadget 09-12-2005 10:13 PM

Re: LT1 Engine Parts - Scat, Mahle
 
top

gogogadget 09-14-2005 12:49 PM

Re: LT1 Engine Parts - Scat, Mahle
 
still for sale - buy rods and pistons - get free shipping

firebirdStud 02-16-2006 09:03 AM

Re: LT1 Engine Parts - Scat, Mahle
 
so, is this still for sale dude?


All times are GMT -5. The time now is 07:31 AM.


© 2024 MH Sub I, LLC dba Internet Brands