wheel size for 3rd gen f body
#1
wheel size for 3rd gen f body
what specific wheel size will fit a 3rd gen f body. I know take offs from a 4th gen wont fit.
#2
Re: wheel size for 3rd gen f body
4th Gen wheels can be used by adding adapters about 1.5" - 2.0" thick.
We have a "Wheels and Tires Forum", with a "sticky" thread covering a 3rd Gen with C6 wheels. That particular car used a wider 4th Gen rear axle assembly, but it could have been done with the 3rd Gen rear, using the same 1.7" adapters he used in the front.
Wheels and Tires - CamaroZ28.Com Message Board
Since you already have a thread on "Wheels and Tires", we'll close this one.
We have a "Wheels and Tires Forum", with a "sticky" thread covering a 3rd Gen with C6 wheels. That particular car used a wider 4th Gen rear axle assembly, but it could have been done with the 3rd Gen rear, using the same 1.7" adapters he used in the front.
Wheels and Tires - CamaroZ28.Com Message Board
Since you already have a thread on "Wheels and Tires", we'll close this one.
Thread
Thread Starter
Forum
Replies
Last Post
BandDirector Blk98ZM6
Parts For Sale
2
02-20-2015 07:42 AM
chevroletfreak
LT1 Based Engine Tech
202
07-04-2005 05:00 PM