I need to find me a sub box that'll fit in the back of my camaro. I'd really like one that's custom made to fit in the back, not just any ordinary box. It needs to have 4 holes for 10" subs. My boyfriend made me one for my Firebird but it won't fit in my camaro Anyone know where I could get one? Or are there some that I could buy that don't have any holes, you just cut em yourself?

 

first you have to take into consideration the air space needed for your subs. you want 4 10's. so you know you are going to need at least 45 inches across for them to fit. What year is your camaro? What kind of subs are they? and do you want them allined 4 in a row or 2 and 2? if you want my advice i say sell the 10's and buy 2 12's the sound will be better, you will have deeper bass, you won't need as many amp crossovers or total power, and you will save money because the box you are wanting will have to be custom built and subthump.com has boxes for 2 subs already built.

 

i can make one, get me on AIM if you want to discuss the box.
bigbadbowtie95z

 

I don't need one made, my boyfriend works at a car stereo store and can build me one, I was just wondering if there was a place I could buy one already built.

Yes, they will fit 4 in a row.

It's a 94z. The subs are fusion. They were given to me from by bf for a sweetest day gift, I will NOT sell them, they sound absolutely great, better than the other 2 sets of 12"s I've had in the past.

 

Here's what the subs & box looked like in my Firebird... I'd like something similar:

 

Yes, but that box is installed in a 3rd gen. The area is a lot wider than in the 4ths. I could probably do it. But you won't find a box available to put them all in a row like that without removing the trim panels on the sides. That's what limits the width of the box. Just like seabass said. Ten inch subs are typically between 10-1/4 to 10-1/2" in diameter. So four of them at 10.5 is 42", which is wider than that space. Even staggering them like in the pic doesn't gain you all that much. Possible enough to do it. Find the right pair of 12s and some power and won't miss them. JMO.

 

what about two of these http://cgi.ebay.com/ws/eBayISAPI.dll...tem=1947498834 and then a box to fit in the back like this http://cgi.ebay.com/ws/eBayISAPI.dll...tem=1948239114 would that work?