1988 Firebird Formula 350 - Roller, Currie 9 inch, detroit locker...
1988 Firebird Formula 350 - Roller, Currie 9 inch, detroit locker...
1988 Firebird Formula 350 - (Rolling Chassis, Street Race Car) California Car, no rust
- Currie Enterprise Bolt-In 9" rear. Detroit Locker, 4.11 gear. 31-spline axles, disc brakes
- solid lower control arms
- th-350, full manual valve body, aluminum trans pan
- b&m mega shifter w/nitrous activation button in handle
- 3.5" dia. aluminum driveshaft
- driveshaft safety loop
- lakewood 90/10 front drag struts
- lakewood 50/50 ear drag shocks
- air bags in rear coils
- battery in trunk/rear cargo area & flaming river push rod type on/off safety switch
- nitrous blow down tube vented out rear fender well
- 2 sets of factory wheels, brand new nitto tires on one set
- steel braided hose on front brake lines
(Cost on the Currie 9" alone is $3800 if you were to buy it new today.)
Car is very dirty from sitting outside underneath a tree for a couple years and I am on a dirt road. The car is from California and has no rust. Interior is out for a roll cage install that was never done. I do have the complete interior for the car and it is a grey color.
There are some more parts that are not listed above that will be included with the sale of the car, I can not tell you what those parts will be......it will basically be anything I find that can go with the car is going to be thrown in. Could be 1 or 2 things, could be 25, just depends what I run across.
Take it all home for $2000. Clean & clear title.
Pictures available on request.
- Currie Enterprise Bolt-In 9" rear. Detroit Locker, 4.11 gear. 31-spline axles, disc brakes
- solid lower control arms
- th-350, full manual valve body, aluminum trans pan
- b&m mega shifter w/nitrous activation button in handle
- 3.5" dia. aluminum driveshaft
- driveshaft safety loop
- lakewood 90/10 front drag struts
- lakewood 50/50 ear drag shocks
- air bags in rear coils
- battery in trunk/rear cargo area & flaming river push rod type on/off safety switch
- nitrous blow down tube vented out rear fender well
- 2 sets of factory wheels, brand new nitto tires on one set
- steel braided hose on front brake lines
(Cost on the Currie 9" alone is $3800 if you were to buy it new today.)
Car is very dirty from sitting outside underneath a tree for a couple years and I am on a dirt road. The car is from California and has no rust. Interior is out for a roll cage install that was never done. I do have the complete interior for the car and it is a grey color.
There are some more parts that are not listed above that will be included with the sale of the car, I can not tell you what those parts will be......it will basically be anything I find that can go with the car is going to be thrown in. Could be 1 or 2 things, could be 25, just depends what I run across.
Take it all home for $2000. Clean & clear title.
Pictures available on request.
pictures please
khshapiro@msn.com
khshapiro@msn.com
Thread
Thread Starter
Forum
Replies
Last Post
dbusch22
Parts For Sale
0
Jan 13, 2015 09:52 PM
formula79
Automotive News / Industry / Future Vehicle Discussion
207
Aug 10, 2002 08:59 PM
regular Joe
Car Audio and Electronics
3
Aug 10, 2002 07:15 PM



