95 Formula Firebird
95 Formula Firebird
Gauging intrest in my car
95 Pontiac Formula Firebird
Motor:
160,XXX miles on it
Top end was rebuild with 99,XXX on the clock
Comp Cams 305 cam, Ported &Polished Heads in it ( see flow numbers Below) 58MM Holley throttle body , Ram Air kit and hood , Granetelli de screened MAF sensor , hardened pushrods , Crane 1.6 RR
Tranny /Drive Train
Tanny was rebuilt by AZ Automasters 40,000 miles ago with all the corvette upgrades done to it , Has a shift kit in it , B&M Super cooler, 2800 Stall , B&M deep Tranny Pan
LS1 Aluminum Drive shaft
Suspension
Bilstien Shocks (less than a year old), Eibach Springs , Granatelli LCA's, BMR LCA relocation Brackets, Random Technologies Adjustable Torque Arm,
Exhaust
It has Eldebock mids on it with a gutted cat and a borla cat back with meachem tips
17" Konig Monsoons rims with Nitto 555 on them , 2 rims have curb rash but i also have 4 more rims for the car
Ram air hood and air box , TA wing , LS1 Tail Lights, SS Pontiac lettering on rear bumper,
Other things to go with the car are
Factory Service manuals all 3 books
LS1 front brake upgrade that were power coated red along with the spindles , Earls SS brake lines and Bleeders,
Chrome Valve covers
3:42 gears
Interior
MBA Shift **** (Red with Firebird logo on it)
MBA Chrome Pedal Covers
Polk Audio speakers though out
Factory Red Leather interior (Seats need redone)
I'm probably forgetting allot of stuff on this car ( I've owned this car for 10+ years)
Flow Numbers
Intake Exhaust
.200 125.2 104.9
.300 180.9 135.5
.400 226.5 165.4
.500 258.4 180.6
.600 279.2 190.2
They were Stock Aluminum Heads that I had ported , Also has a Ported Intake that is powder coated red
Asking 5,000 OBO
95 Pontiac Formula Firebird
Motor:
160,XXX miles on it
Top end was rebuild with 99,XXX on the clock
Comp Cams 305 cam, Ported &Polished Heads in it ( see flow numbers Below) 58MM Holley throttle body , Ram Air kit and hood , Granetelli de screened MAF sensor , hardened pushrods , Crane 1.6 RR
Tranny /Drive Train
Tanny was rebuilt by AZ Automasters 40,000 miles ago with all the corvette upgrades done to it , Has a shift kit in it , B&M Super cooler, 2800 Stall , B&M deep Tranny Pan
LS1 Aluminum Drive shaft
Suspension
Bilstien Shocks (less than a year old), Eibach Springs , Granatelli LCA's, BMR LCA relocation Brackets, Random Technologies Adjustable Torque Arm,
Exhaust
It has Eldebock mids on it with a gutted cat and a borla cat back with meachem tips
17" Konig Monsoons rims with Nitto 555 on them , 2 rims have curb rash but i also have 4 more rims for the car
Ram air hood and air box , TA wing , LS1 Tail Lights, SS Pontiac lettering on rear bumper,
Other things to go with the car are
Factory Service manuals all 3 books
LS1 front brake upgrade that were power coated red along with the spindles , Earls SS brake lines and Bleeders,
Chrome Valve covers
3:42 gears
Interior
MBA Shift **** (Red with Firebird logo on it)
MBA Chrome Pedal Covers
Polk Audio speakers though out
Factory Red Leather interior (Seats need redone)
I'm probably forgetting allot of stuff on this car ( I've owned this car for 10+ years)
Flow Numbers
Intake Exhaust
.200 125.2 104.9
.300 180.9 135.5
.400 226.5 165.4
.500 258.4 180.6
.600 279.2 190.2
They were Stock Aluminum Heads that I had ported , Also has a Ported Intake that is powder coated red
Asking 5,000 OBO
Last edited by 95 firechicken; Aug 31, 2007 at 09:31 AM.
Thread
Thread Starter
Forum
Replies
Last Post
Formula Steve
LT1 Based Engine Tech
45
Sep 19, 2023 08:31 AM
tommalcolm
Computer Diagnostics and Tuning
2
Sep 11, 2015 03:39 PM



