Well, after many arguments with myself I'm finally just going to get rid of my long-term project. I don't have the motivation nor time/$$ to put it back together anymore.

1974 Nova SS 2dr Coupe
Back-halved (Chassis Engineering 4-Link kit, CE 10-pt cage, & Subframes)
Ford 9" Rearend, shortened over 6"
Moser 33 Spline custom axles
Convo Pro 15x15 rear wheels W/Sportman Pro tires
Hooker BBC headers/Headman SBC headers (I'll include both)

The car is fully disassembled but is rolling on rear wheels and castors upfront.

I have 90% of the parts to re-assemble; everything but the custom stuff that will be needed to finish the project.

It is a full steel body with some repairs done in lower rear corners, it could possibly use new lower 1/4s if making into a show type car; otherwise they can be repaired and look/work fine for a street/race car.

I have all the body panels, interior, hood, glass, core support, grille, both steel bumpers, etc; the car was complete and only had a blown motor/trans when I tore it apart.

This was my first car when I was 16, I restored it, then had it back halved at a shop, in what was going to be a pro-street car for myself, I then went to college and the car has sat since. So all the parts from when I took it I have in boxes.

Rough items needed to finish (Not a complete list, but pretty close):
-Wire harness Kit (Like a painless fusebox and wire kit)
-Engine
-Trans
-Driveshaft
-9" 3rd member
-Back-half sheetmetal (Wheel wells, and panels; There were aluminum panels put in by the shop who did the back-halving, but they looked like crap and were removed; I was going to put steel panels in but never did)
-Interior (I have all the panels, but due to the back-halving, the rear part will have to be custom if decided to put an interior in.
-Brakes
Time...

I have pictures but not of everything; I'm slowly digging into my dad's garage to get everything out. The car is located in Spencerport, NY (west side of Rochester,NY), but will deliver within 50 miles; greater than 50 miles will cost a minor delivery fee.

I'm looking for $1500 but reasonably offers will be considered.

Pictures are available, I'll probably post them tonight.