How much u willing to pay for 1200hp turbo kit? Maybe for sale

I have had a turbo kit on my LT1 car for about 3 years now. Everything worked mint. It has 2 63mm turbos (GT40 compressers with .70 turbine) On 24lbs of boost i made 1003rwhp. Im doing a lot to the car and was thinking of changing the headers to make some new stuff fit better. I was thinking of selling all the hot parts and keeping the cool parts but if the price was right i would sell everything as a kit so all you would need to do is bolt it up and maybe move the radiator down a bit. This kit also requires to move the alt and p/s down low.

If someone where to buy it they must have experience with cars and be able to do small fab work if needed. I dont really have time to hold someones hand while they put it together. I will tell you how everything fits and best way to put it together, but you must fab up your own brackets.

The inlet temps right now only get 15 degress max above ambient during 1 full 1/4 pass. Please dont ask for a price just give me what you think is a reasonable price and if its good its yours.

The headers were made with a mig welder. they dont look the best but work well and dont leak.

Let me know if your interested
jake

this kit will fit with the factory k member. It has custom twin 3" down pipes that end by the axels.
Includes:
2 63mm turbos
2 waste gates
headers
full exhaust
intercooler
intercooler piping

Do you have any pics?

hmmmm.....im still having fun with that procharger you sold me,but I would not mind having your twin setup on my z28.

Sorry i used a camera i got out of a gumball machine

http://home.comcast.net/~excesories/tt1.jpg
http://home.comcast.net/~excesories/tt2.jpg
http://home.comcast.net/~excesories/tt3.jpg
http://home.comcast.net/~excesories/tt4.jpg
http://home.comcast.net/~excesories/tt5.jpg

The down pipes need to be wrapped as you can see. Im willing to sell the turbos and all hot pipes or if you want the hole kit with intercooloer and pipes ill sell that as well

Jake

Considering I had three failed sales, before the current sale which has yet to pay, for my twin turbo kit priced at $2500, I think you will be dissappointed. not only did my kit only have about five hours of run time, I included a huge four inch bar and plate intercooler, all cold side tubing, TIG welded headers and hot-side tubing, all oil lines and fittings, oil pan, custom three inch dual core Griffin radiator and spal 16" fan, brackets, all necessary bolt and nuts in stainless, 40mm JGS wastegates, HTS silicone couplines and transitions, HTS vacuum hose, and more. My kit included everything and only required the removal of the stock radiator and core support for the installtion of mine.

Nonetheless, I wish you luck and hope any deals you make are better than the bargain-buster types I made.

Here's a bump for a turbo guy ;)