Jerm93z28
11-21-2002, 11:10 PM
just thought i would see if any of you guys might be interested in buying the LT1 from my '93. it ran the times in sig :)
here's the specs:
stock shortblock
comp xe 230/236 .544/.555" 112lsa
comp 986 double springs
comp retainers/locks and guideplates
crane gold 1.6 rocker arms
cloyes tru-roller timing chain
'95 timing cover w/ vented opti
csi electric waterpump
diy ported heads (unsure of flow #s but obviusly they were working pretty good)
engine also comes with all wiring and computer with program from pcmforless. its the baseline program, but it ran pretty dang good!!
keep in mind i ran times in sig with a stock throttle body, 3.42 gear, oem clutch, and plenty of tuning room left in it.
the only thing it needs is a set of rings, as it had some blowby, making my valve covers leak. cylinder walls had zero ridge at the top, and the inside of the engine was very, very clean.
im lookin for $2200.
jeremy
here's the specs:
stock shortblock
comp xe 230/236 .544/.555" 112lsa
comp 986 double springs
comp retainers/locks and guideplates
crane gold 1.6 rocker arms
cloyes tru-roller timing chain
'95 timing cover w/ vented opti
csi electric waterpump
diy ported heads (unsure of flow #s but obviusly they were working pretty good)
engine also comes with all wiring and computer with program from pcmforless. its the baseline program, but it ran pretty dang good!!
keep in mind i ran times in sig with a stock throttle body, 3.42 gear, oem clutch, and plenty of tuning room left in it.
the only thing it needs is a set of rings, as it had some blowby, making my valve covers leak. cylinder walls had zero ridge at the top, and the inside of the engine was very, very clean.
im lookin for $2200.
jeremy