help tuner pro?

anyone use tuner pro im trying to figure out how to use it, i fried 2 pcms so far. i started by just using a old tune and changing **** points, when i load it it fried the pcm?

are the fans on constant and SES light flickering? if so its not fried.. just a bad image.. take a look at the post a few lines down about the 3 fried ecm's.. I found the problem and the fix.. tomorrow I will figure the switch position on the moates adater but its either 10k on the diag term or shorting it that wakes the ecm back up to flash

yes fan are running