69 Camaro half restored

Thread Tools
 
Search this Thread
 
Old Dec 4, 2006 | 10:18 AM
  #1  
gotsnappy's Avatar
Thread Starter
Registered User
 
Joined: Jun 2005
Posts: 31
69 Camaro half restored

Unfortunately I have to sale my car I have been working on for the last 2 years. I have put more money in it than what I am asking for the car. Not to mention the many hours I have worked on this car. My loss will be your gain. It is about half way through restoration. This is an X 44 Camaro that had a v-8 and manual Transmission from the factory. It comes with a rebuilt 327 out of a 68 Camaro along with a four speed trans. (not rebuilt) Factory color was Glacier Blue (dark blue) with blue standard interior. I have everything for this car except for some small things. I have bagged and tagged everything on the car. Title is in my name and clear!

I have redone the rearend and springs (10) with por15; it also has an Ultimate Ten girdle on the rearend. Also installed polly bushings in the rear and spring pads. The front subframe was done with por15; it has all new bushings (stock style not polly) on the control arms etc. The front coil springs are new. There is a new power disc Brake setup. I have installed the rotors and calipers not the booster or master cylinder yet. I have a rebuild kit for the front steering arms (not installed yet)

All of the interior seats are in good shape for a driver, headliner in fair- good shape. Not show quality perfect but useable if you wanted to. No panels for the doors or dash pad.

All of the front clip is NEW Sheetmetal a lot of it was Goodmark product, including SS Hood, both fenders and extensions, header panel, lower valance, wheel wells. I have replaced the floors and the truck floor in it. I have replaced the dash panel and have detailed under the dash while it was off. I have 2 new Quarters that need to be installed, and then it is off to the body shop for final blocking and paint.

Other parts included are:

2 Fenders and fender extensions NEW
Radiator support Used
Pass & Driver floor pan, new
Header panel new
Truck pan NEW
Dash panel NEW
Front Suspen rebuild kit, NEW
Subframe mounts NEW
Rally rims Used
Camaro emblems new
Coil springs new
69 fin emblems new
2 full quarters new
Subframe parts, idler arm, etc new
Trim rings for rims new
Front and rear bumper new
F. Power disc brakes kit NEW
Front shocks Monroe
Trunklid new
Subframe hardware new
Rear axle pads & bushings NEW
Radiator USED
lower valance & Header panel new
2 inner fenders new

No Scammers PLease!

Call or email Rusty 979-777-4067 gotsnappy@yahoo.com
Old Dec 4, 2006 | 12:22 PM
  #2  
GOTPLZ2's Avatar
Registered User
 
Joined: Dec 2004
Posts: 180
how much where is it located?
Old Dec 4, 2006 | 02:05 PM
  #3  
jerminator96's Avatar
Registered User
 
Joined: Nov 2004
Posts: 1,374
From: Raleigh, NC
Same question. I have money and stuff to trade if you're interested.

Jeremy
Old Dec 4, 2006 | 05:50 PM
  #4  
gotsnappy's Avatar
Thread Starter
Registered User
 
Joined: Jun 2005
Posts: 31
Sorry..........no Trades
College Statoin TX ( I thought that was on my profile, guess not)
Old Dec 5, 2006 | 11:22 AM
  #5  
Rage's Avatar
Registered User
 
Joined: Aug 2002
Posts: 465
From: Baytown Tx, Home of HRP
How much do you want for the car?
Old Dec 5, 2006 | 06:09 PM
  #6  
tonylittell's Avatar
Registered User
 
Joined: Aug 2004
Posts: 795
From: richmond virginia
price is always nice
Old Dec 11, 2006 | 12:00 AM
  #7  
Friday13th's Avatar
Registered User
 
Joined: Feb 2001
Posts: 81
From: Reading, PA, USA
Price and zip?????????
Old Dec 11, 2006 | 12:04 AM
  #8  
Friday13th's Avatar
Registered User
 
Joined: Feb 2001
Posts: 81
From: Reading, PA, USA
does the car have RS headlights(hide-a-away)

any pics??? you can email to mprtkllr99@msn.com
Old Dec 11, 2006 | 06:47 AM
  #9  
tonylittell's Avatar
Registered User
 
Joined: Aug 2004
Posts: 795
From: richmond virginia
guess you dont really want to sell the car?
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
94Z28LS1toLT1
LT1 Based Engine Tech
7
Jan 15, 2015 07:18 PM
dirtybird81
Fuel and Ignition
10
Jan 6, 2015 09:31 PM
Cam's maro
LT1 Based Engine Tech
1
Dec 28, 2014 09:30 AM
NewsBot
2010 - 2015 Camaro News, Sightings, Pictures, and Multimedia
0
Dec 3, 2014 12:30 PM
cristian1311
General 1967-2002 F-Body Tech
4
Nov 23, 2014 02:22 PM




All times are GMT -5. The time now is 08:17 AM.