YZF/LS1 Freak
12-05-2005, 10:08 AM
Oops, I went back to this link threw e-mail and deleted it thinking it was still in the LT1 section so sorry for your post being deleted Diable GT
Well, I talked to a buddy of mine who has a mutual friend who used to have a hugger orange LS1 Z. Got rid of it and now has a SBC S-10. He got a blown up (thrown rod heads are fine) f-body LT1 and told me he would sell t to me for 200, I told him I would give him 100 for the heads and he said sold (can we say re-sale for 200). He also forgot about a Paxton SN93 blower for LT1's that he had laying around and he is so desperate for money that he told me he will see it to me for $100, yes $100!. My other buddy looked at it and said its polished, has brackets belt, everything you need and is serial number 9320026.
Just missing the key that holds the pulley on the blower as far as he knows. He turned it over and said it was smooth and not making any bad noises hmmmm, gonna check it out in the morning.
Update, went over and checked it out, looks more like a mustang kit to me has the blower, tube that goes from the blower to the TB (looks like mustang), belt, clamps, mounting bracket, and those rubber tube things.
Just called paxton and the gave me another number to call later, I figure I can call and give them the serial and see what it goes to. If it is LT1 I am going to need a manual.
There is one Paxton blower on ebay going for 255. If its a stang I could sell it for good money!
He told me if I give him the MSD 3 stage timing retard that I have (was gonna sell it for $60 that I could have his 93-95 LT1 AND the blower for $150. The LT1 has a thrown rod threw the oil pan (three holes), no intake or opti, could pull the heads port them throw them on my car and then sell mine for $200, throw the hardened push rods into my car if they are ok, sell the stock cam, timing chain, pistons and rockers, lifters, oil pump, cam cover for some change. If there is descent money in stock cranks I may have it checked out and sell it.....
What do you guys think on the blower situation...
Well, I talked to a buddy of mine who has a mutual friend who used to have a hugger orange LS1 Z. Got rid of it and now has a SBC S-10. He got a blown up (thrown rod heads are fine) f-body LT1 and told me he would sell t to me for 200, I told him I would give him 100 for the heads and he said sold (can we say re-sale for 200). He also forgot about a Paxton SN93 blower for LT1's that he had laying around and he is so desperate for money that he told me he will see it to me for $100, yes $100!. My other buddy looked at it and said its polished, has brackets belt, everything you need and is serial number 9320026.
Just missing the key that holds the pulley on the blower as far as he knows. He turned it over and said it was smooth and not making any bad noises hmmmm, gonna check it out in the morning.
Update, went over and checked it out, looks more like a mustang kit to me has the blower, tube that goes from the blower to the TB (looks like mustang), belt, clamps, mounting bracket, and those rubber tube things.
Just called paxton and the gave me another number to call later, I figure I can call and give them the serial and see what it goes to. If it is LT1 I am going to need a manual.
There is one Paxton blower on ebay going for 255. If its a stang I could sell it for good money!
He told me if I give him the MSD 3 stage timing retard that I have (was gonna sell it for $60 that I could have his 93-95 LT1 AND the blower for $150. The LT1 has a thrown rod threw the oil pan (three holes), no intake or opti, could pull the heads port them throw them on my car and then sell mine for $200, throw the hardened push rods into my car if they are ok, sell the stock cam, timing chain, pistons and rockers, lifters, oil pump, cam cover for some change. If there is descent money in stock cranks I may have it checked out and sell it.....
What do you guys think on the blower situation...