|
||
I can't get the intake manifold off1990 NA 300ZX 10-24-2002, 10:40 PM I unbolted all the bolts (3.4 camaro) but it still won't come off,also the fuel rail won't come off, what am i doing wrong? That piece of **** haynes manual is worthless it does not give compleat detail, i should have bought a chiltons:mad: can someone help please? stagen 10-24-2002, 11:04 PM If this is the first time you have taken it off or it has been removed then you need to use a little muscle. The gaskets are well worn on there. For the fuel rail releive the pressure first, take off the two screws on top, then you'll need to possibly give it a little prying with a long screw driver under the main rail. Your o-rings are probably hard as a rock by now keeping it tight. Upper Intake plenum: remove TB and accelerator cables etc.. remove all the wiring harness etc, move aside on the left (passenger side) remove wire and module from the side of the plenum Remove bolts lift plenum Tiago 10-25-2002, 12:18 AM gotta put some muscle into it! :metal: stagen 10-25-2002, 12:38 AM LOL - -kind of like that bell housing bolt of Jeff's :bow: Tiago 10-25-2002, 01:19 AM Originally posted by stagen LOL - -kind of like that bell housing bolt of Jeff's :bow: :metal: nikkev 10-25-2002, 01:26 AM Block of wood and a big hammer :D But make sure all the bolts are out first! :eek: Kevin 1990 NA 300ZX 10-25-2002, 01:37 PM Ok so its muscle, wood, and a big hammer got it:D stagen 10-25-2002, 02:16 PM Originally posted by 1990 NA 300ZX Ok so its muscle, wood, and a big hammer got it:D Make that a BFH and your set robvas 10-25-2002, 04:40 PM Whatever you do, don't start prying away with a screwdriver or something... Originally posted by stagen Make that a BFH and your set | ||