|
||
Noone makes a polyurthane transmission mount for LS1s!!!!KamaroL98 10-24-2002, 12:23 AM I just called Summit and they looked into energy Suspension and some other suspension company and noone made tranny mounts for LS1 Fbodies!!! There was a little note from E/S that said that "They are making one for the 1998+ Fbodies now.... I know some of you guys have replaced the rubber ones with poly urathanes, who did u get them from? V6toZ28 10-24-2002, 01:30 AM Originally posted by KamaroL98 I just called Summit and they looked into energy Suspension and some other suspension company and noone made tranny mounts for LS1 Fbodies!!! There was a little note from E/S that said that "They are making one for the 1998+ Fbodies now.... I know some of you guys have replaced the rubber ones with poly urathanes, who did u get them from? They're wrong ... try tbryne or thunder ... Good Luck 2002Z28SSConv 10-24-2002, 02:54 AM $23.99 at www.tbyrne.com Look under the suspension section. KamaroL98 10-24-2002, 04:26 AM I called summit again and got a different person and he found one from energy suspension for my car right off the bat.....:confused: :bow: decided to be extra cool and get a red in color mount...:cool: one wicked element 10-24-2002, 02:03 PM Originally posted by KamaroL98 I called summit again and got a different person and he found one from energy suspension for my car right off the bat.....:confused: :bow: decided to be extra cool and get a red in color mount...:cool: Same thing happened to me when I called summit. - They flat out wouldn't sell me one. So, I called BMR Fabrications.com (http://www.bmrfabrication.com/) and ordered a red tranny mount from them....along with the rest of my order that included a red Driveshaft Safty Loop (http://www.bmrfabrication.com/misc/DSL.jpg). Summit lost 2 orders, and BMR got 2. Milo. psychocabbage 10-24-2002, 11:38 PM last time I checked the tranny mount didnt touch anything dealing LS1.. It was on a 4L60E last time I did one.. I got the black one for my last car.. but thats only cause I dont know of anyone else who was getting under there to look at it.. If any of you want to add more stuff to your order that will help, I would suggest: ES Torque Arm bushing.. (really does help some) get in with somone and split an Air Bag kit from AirLift. Place 1 air bladder in your right rear spring.. inflate to about 20-22psi at the track.. YAY.. added traction.. for about a whopping $35-$40!! JMO though.. worked on my LT1.. will eventually be on my LS1.. | ||