Spohn adjustable torque arm install??(PLEASE)

I receive mine today but it came without install instruction.I know the basic to put it on the car, thats not a problem.

But there s 2 big bolts on the pieces that connect on the cross member.One of them pass trought the polyurethane bushing and the other one keeps the pieces together.Do i have to tight these bolts very hard or should i left a small play??

And how do i adjust it with the angle finder???

And is there anything that i should know?

Thanks

Send him an e-mail on the "tech" line.... he should be able to send you the instructions. Mine came with several pages.

I ve found this :

http://www.go-fast.org/z28/pinionangle.html

Is this the good way?

Thank you

Yes, those instructions for setting pinion angle will do the trick.

Yes, those instructions for setting pinion angle will do the trick.


Thank you :bow:

Tighten the rearend bolts and tighten the mount. Leave everyting else loose. After you set the pinion angle, then tighten the side bolts. I used an impact gun on the rear and some wrenches on the sides.