IMPORTANT: Those with Taylor wires

http://web.camaross.com/forums/showthread.php?p=3204802#post3204802

Read this, it concerns you.

ive had mine for a couple years now. but you got me curisou so i went and checked. no sparks here. must just be yours.

Well hedz i wish you luck on this.. And i hope this is not the case, because i just put taylors in mine with ngk plugs.. Ill look into this when i put my car back together..

im begining to think its jsut newer ones.......


Thanks for the input guys, keep it comin.

I've had my Taylor wires for almost three years now with no problems.

My setup is somewhat fortified though: heat shield boots & high temp jackets on problem areas.

After this set goes, I'll buy Taylor again.

Ok, in the general tech forum people are saying that even a while ago, people have noticed serious problems with Taylor wires.

Read up on it.

Its mainly low RPM hesitation, but it will hesitate through the entire range.

Have you contacted Taylor at all?

i had heard a few things about taylor. but no more than any other. besides possibly msd. Its hard to keep any wires from doing that too long w/o doing things like importkiller, the heat shields and and sleeves are a must on our cars. there is a sticky on how to prevent it.

i had heard a few things about taylor. but no more than any other. besides possibly msd. Its hard to keep any wires from doing that too long w/o doing things like importkiller, the heat shields and and sleeves are a must on our cars. there is a sticky on how to prevent it.


What you dont get is that these wires are practically brand new, my friend's ARE brand new. Its not like they are melted, worn, dryrotted, etc.


I put stock wires on tonight, new ones, and it runs fine now.

thats crazy. I havent ever heard anything like that before. i would contact taylor and let them know. That doesnt sound right.