My car: 1996 Camaro LT1 SS with 121 thousand kilometers, which is around 72k miles.

Mods: Jet-Hot LT headers, Mufflex y-pipe, SLP 2OTL catback, cutout, GM 1.6RR, Spec Stage II, swapped out stock SS cai for a K&N fipk.

Conditions: 98* F, 29.6 in-Hg, SAE: 1.02 with cutout open for both runs

First run: Max Power = 293.02, Max Torque = 318.55

Second Run: Max Power = 293.09, Max Torque = 318.23

I am very happy with these numbers. The guy who did it was also very impressed with how consistant the numbers were. Both runs were nearly identical as you can see, and my A/F ratio was dead on.

My orginal guess was 289HP and 297TQ. I was pretty close on HP, but these things really are TQ monsters. From 2.5k to 4.5k RMP the TQ was between 310 and 318. But unfortunately it dropped pretty hard after that.

What do you guys think?

 

I've seen better.....







haha, just messin with you, yeah those are pretty good.

 

i would have expected over 300 with the intake, exhaust and rockers.

get a tune by madwolf and i'd bet you'll break 300.

 

Our mods are in our signature.Car dynoed at 318 hp 338 ft lbs torque

 

I put down 280/315 with Intake, clutch, mac mids, gutted cat, hoooker cat back and tune. so your not doing to bad.