Need Fuel Line O-Ring/Bushing for 2.8
Need Fuel Line O-Ring/Bushing for 2.8
Hi, I had to swap the fuel rail on my '88 2.8liter Camaro, and during the swap the bushing or o-ring that goes onto the end of the fuel line where it plugs into the rail got lost. I need the tiny little bushing that seals around the gas line when it's inserted into the fuel rail.
I know it's a long shot, but my car won't run without it because it keeps spraying gas everywhere when the fuel pump primes.
I need the one for the main fuel line itself; the line is on the driver's side of the car. Thanks.
I know it's a long shot, but my car won't run without it because it keeps spraying gas everywhere when the fuel pump primes.
I need the one for the main fuel line itself; the line is on the driver's side of the car. Thanks.
Re: Need Fuel Line O-Ring/Bushing for 2.8
i have a car that has a bad 2.8 i can take the line off of, i would suggest a whole line swap, the bushing may wear with the line, hows 35.00 on the line with bushing, i can ship it out Monday morning , i will be out of town the nest 2 days
Re: Need Fuel Line O-Ring/Bushing for 2.8
I really just need the bushing. I just want to see if the motor will run right; I don't want to dump a whole lot of money into it and then find out that the motor's ruined (someone saw fit to pour sugar in the gas tank).
How about $10 for the bushing shipped? Thanks, let me know.
How about $10 for the bushing shipped? Thanks, let me know.
Thread
Thread Starter
Forum
Replies
Last Post
dbusch22
Forced Induction
6
Oct 31, 2016 11:09 AM
87Aerocoupe
Forced Induction
6
Mar 20, 2015 01:23 AM
chevroletfreak
LT1 Based Engine Tech
202
Jul 4, 2005 05:00 PM



