DiabloGT
03-27-2005, 03:36 PM
if i were to get an LE2 cam instead of a emission cammed le1, and i went to the emissions in MA, would they fail me? how? is there any ay i can get away with it? or even pay them to pass me?
thanks
thanks
|
||
emission cams...DiabloGT 03-27-2005, 03:36 PM if i were to get an LE2 cam instead of a emission cammed le1, and i went to the emissions in MA, would they fail me? how? is there any ay i can get away with it? or even pay them to pass me? thanks RealQuick 03-28-2005, 11:17 AM If this is going in your 95', then you'll be put on the rollers. I dont know the specs of the cam, but I doubt it will pass if LE has a smaller "emissions legal version" in the LE1 cam. Unless you know how to get a sticker illegally, you cant just buy one and have them pass you. Crovax WS-6 03-28-2005, 01:38 PM this isnt the type of stuff you wanna be talkin about on an open forum. You are better off askin people through pm's.... Edit: i meant the part about illegal stickers. jgeorger 04-01-2005, 06:13 PM I don't know the specs of the cams you are talking about, but you things you can do to help pass: good cats retard timing put some alcohol in your gas I passed the treadmill by retarding timing. I have a CC Xtreme 218/230-114. DiabloGT 04-03-2005, 05:51 PM how can i retard timing, and how much alcohal in how much gas would i mix? thanks jgeorger 04-03-2005, 06:52 PM Buy tunercat (www.tunercat.com ) to reprogram your pcm. It is cheaper than LT1-Edit and gives you the same functionality. You will need a laptop. The cable is sold separately - best place to get it from is www.akmcables.com. I think for the alcohol you should use xylene or toluene - I have seen one or both at a hardware store. I think no more than 2 gallons per full tank of gas. Search the Lt1-Edit mailing list archives since I know it's been discussed there before. | ||