brake noise normal?

Just replaced front pads and rotors with Hawk HPS and Brembos. The brakes worked fine on some 30->0 trial stops, but when I first hit the pedal there's a "thump" and during breaking there's a "thupita thupita thupita" type noise. Does this sound like usual noise from new rotors and pads mating, or is something screwed up?

Just replaced front pads and rotors with Hawk HPS and Brembos. The brakes worked fine on some 30->0 trial stops, but when I first hit the pedal there's a "thump" and during breaking there's a "thupita thupita thupita" type noise. Does this sound like usual noise from new rotors and pads mating, or is something screwed up?
do u have ABS are u sure its just not that , if not check to c if everything is bolted up tight

Yes I have ABS, but this sound is different from the ABS sound (I know what that sounds like).

Suppose I could take the caliper off and reinstall it and make extra sure it's all tightened down properly.

Yes I have ABS, but this sound is different from the ABS sound (I know what that sounds like).

Suppose I could take the caliper off and reinstall it and make extra sure it's all tightened down properly.
u do that and tell us how it works out

The thump is not normal, but when I installed my Powerslot rotors and Hawk pads I had a wierd sound from the brakes for a day or so. Not sure how to describe it but I'm pretty sure it was from the pads hitting the slots.

its prolly not the same thing but i added drilled and slotted rotors on the stock settup and never had this happent to me ,

hope u find ur problrm bro

It turns out the caliper was loose :eek: . Tightened it down and it's working perfectly.