Custom pipe bending

i was wondering if any one in the detroit area knew a shop that would do this for me im working on a turbo kit for my 3.8 and i have drawings i just want to put it all together and i need pipes bent..... and about how much would this cost any ideas??????

I could send u to one of two places. The less expensive of the two is Dougs Muffler on Gratiot north of Joy Blvd. You will end up with crush bends unless you want to pay for special order mandrel bends and it'll end up costing more $. The other place is PFE in Mt. Clemens off of Irwin Dr. by Selfridge. You'd have to leave your car with them for a while and it'll cost big bucks, but they do the best work on the east side.

cool thanks alot im gonna give them a call and see what kinda cost im also gonna take the turbo up there to them for best results

Dougs Muffler 586-469-0099

PFE just changed numbers/location you'll have to look it up.

PFE..you get what you pay for, and his prices are still afordable, does awesome custom work, or the bolt on cat back for your Audi..

We do alot of custom aluminum and stainless turbo piping at my shop. Theres a bunch of pics on our site to give you an example of the quality we put out. We can do aluminum or stainless pipes and build some really nice intercoolers as well.

www.clubconceptz.com

click on the Turbo fabrication link on the left once in the site.

Scott

got to go with scott on this one.... the guy that did my cage is outstanding. if he puts the same detail into the little projects i can only imagine.

just be sure you know everything you want done though because getting back in is near impossible..... right scott?

;)

We do alot of custom aluminum and stainless turbo piping at my shop. Theres a bunch of pics on our site to give you an example of the quality we put out. We can do aluminum or stainless pipes and build some really nice intercoolers as well.

www.clubconceptz.com

click on the Turbo fabrication link on the left once in the site.

Scott

from the looks of things on that site looks like good work however id like to know how much am i looking at give a price range if you can with a nice intercooler for the front bumper

6shot38, for the price you'll be paying to fab up a custom turbo kit you should go ahead and buy the proven kit made by Tiago.. FFF's kit is awesome. Something like $3000 and you get EVERYTHING you need.

6shot38, for the price you'll be paying to fab up a custom turbo kit you should go ahead and buy the proven kit made by Tiago.. FFF's kit is awesome. Something like $3000 and you get EVERYTHING you need.


see im trying to weigh the cost of buying his vs building my own but who knows i might order his kit for xmas

The nice thing with his is you dont have to fab up exhaust manifolds nor do you have to worry about finding an intercooler that fits. :P

Stenod racing can do that. Have you ever seen Harlans TT setup? we did that along with a couple other. shoot me a PM of exactly what you want done