Anyone have some T56 stuff laying around?

I need a few pieces I dont have in the salvage yard right now. Mainly a dust shield, cross member, upper shifter section, and the slave unit. Somebody has to have this stuff laying around. Its not very often the junk yard dog has to ask for parts ;)

Q

That stuff isnt expensive from GM

The crossmember is only $20 or so from GMpartsdirect and $21 from cromar... Then I have a dust shield if you need it and what do you mean by upper shifting section? Shift forks and the shifting rod assmembly?

Originally posted by Rodrigues
That stuff isnt expensive from GM

The crossmember is only $20 or so from GMpartsdirect and $21 from cromar... Then I have a dust shield if you need it and what do you mean by upper shifting section? Shift forks and the shifting rod assmembly? I will take the dust shield for sure. The upper section I mean is the part that actually bolts to the factory shifter that goes into the tranny. The part the shift knob attached to. You know where the shifter splits on a factory shifter, I need the upper section that dosent bolt to the actual tranny. Ya got anything else laying around? I believe Sean is gonna be making a trip over here soon, maybe we can get him to play parts bitch again ;)

Q

I think i still have my 98-00 slave layin around

Originally posted by mavricki18
I think i still have my 98-00 slave layin around I wish I could use it, but I believe the LT1 is different. :( Thanks though

I think I have a spare slave in my garage. I know that I threw out my stock shift-lever during spring cleaning.

Hey Q, I've got the stock shifter out of the SS. If the stick is the same we could work something out.

Excellent, Tom and Al, I would be willing to take both of them off your hands. :bow:

What are you doing exactly?

Originally posted by dreamer1q
Excellent, Tom and Al, I would be willing to take both of them off your hands. :bow:

Just never you mind Secrets Boy ;) What you want for the dust cover :D I need it.

Yes you need an lt1 slave Q...

If you are going to use the trans in anything you actually care about I would recommend a new slave assy. from GM. They're cheap.

Originally posted by 95 Z/28 LT1
If you are going to use the trans in anything you actually care about I would recommend a new slave assy. from GM. They're cheap.

I would agree Q. Pick up a new one.

Ok, I didnt realize they were cheap. Plus I wanted to see if I could use a newer one or not ;) Thanks guys

The one you get from GM comes with everything and is pre-bled.

There is an old part number, 10230433, and a new one, 12557509. I don't know what the diff is though. I've replaced mine before with a new one, but I don't remember which one i used. :think:



Edit:

10241153 Flywheel Cover

12337973 Flywheel Bolt. (Need 4)

Sweet, thanks for the part number Jacob :D

It seems that there is a third revision because when you punch 12557509 into gmpartsdirect it says it has been changed to 12559912.

I'm going to have to figure out what I have now. :)