STS-Formula
06-04-2002, 10:29 PM
I've got some 3.42s that I need installed and I don't have the patience or time right now to do it myself.
Can anyone recommend a shop?
Thx
STEVE
------------------
99 TA
Dynomax bullets,Whisper Lid, MAF ends, FTRA, K&N, BMR LCAs,EGR
mod,stock 2.73s
299.3 RWHP
285.4 RWTQ
Since then, Whisper Lid and FTRA
AZ94FORMULA
06-05-2002, 03:08 AM
I think Arizona Automasters does pretty good work. They are located in Chandler, right down the street from Arizona Speed and Latrine.
Kurt
------------------
LT4 HOT cam, GM heavy duty timing chain, Crane chromemoly pushrods, Comp Cams "R" lifters, K&N FIPK, BBK 58mm TB, ported intake manifold, ported & polished heads w/ 2.00/1.56 valves, 30# SVO injectors, MSD wires, BeCool radiator, CSI elec. pump, March PP kit, Crane 1.6:1 RR's, Crane ignition, AS&M 1-3/4" headers, SLP cat-back, high flow cat, Hurst shifter, Centerforce DF clutch, SLP flywheel, 3" alum. drive shaft, Strange 12 bolt with 3.73's, HAL shocks, Eibach/SLP springs, Granatelli STB & upper panhard rod, ST sway bars, SLP subframe connectors, Steve Spohn racing torque arm, RLCA's & lower panhard rod, Wolfe Race Craft roll cage, 13" Baer brakes, SLP 17" SS wheels, Auto Meter gauges, LT1-Editor and more... Dyno tested: 370 RWHP w/ 358 Torque http://www.geocities.com/crash607/kurt1.html
mywhitez
06-05-2002, 03:44 AM
ill do them for 150 installed let me know
------------------
Camaro 13.7@101 cai and flowmaster catback more to come.
86 mustang 12.31@112 1.83 on nittos
Al Harrison
06-05-2002, 11:24 AM
150 that sounds good.I will have to remmeber you when i get my gears.That if you want to do it for me.
------------------
95 Z28 A4 blue with black racing strips
flowmaster exhaust,mac headers,az-speed marine 52mm tb and cold air intake,hypertech programmer,power pully's, msd ingition,eibach pro kit,hotchkis rear supension,hotchkis strut tower,performance spoiler,drag radails
Best ET 13.69
Best MPH 100.52
mywhitez
06-13-2002, 12:40 PM
im ready whenever you are. email is projectlx@aol.com
------------------
Camaro 13.7@101 cai and flowmaster catback more to come.
86 mustang 12.31@112 1.83 on nittos
mywhitez
06-13-2002, 12:43 PM
also if anyone needs 3.42s i have them for sale for $75 they have less than 10k on them
------------------
Camaro 13.7@101 cai and flowmaster catback more to come.
86 mustang 12.31@112 1.83 on nittos
Azimiut
06-16-2002, 10:58 PM
I called my mechanic and asked him, I also have not time, and he told me 200. He is very good. E-mail if you want the #.
------------------
1994 Camaro Z28 !CAGS-Moroso Cold Air Intake-Ported MAF-AZ Speed and Marine 52mm TB-1LE Elbow-Underdrive Pullies-Ported MAF-HI-6 Digital Ignition & LX92 Coil-B&M Ripper Shifter-RK Sport Headers-SLP Y Pipe-Random Tech Hi-flo Cat-Borla Adj Cat Back ( wide open)-160 Therm-'98 Front Brakes-Eibach Pro Kit With Blistein Suspension
!!!YOU CANT GET POWER FROM RICE!!!
1/4 mile: 13.260
MPH: 110.132
97bowtie
06-18-2002, 02:21 AM
The Gear Shop on 40th and University.
------------------
'97 Z28 6 speed - Cayenne Red Metallic
CAI, SLP Shorties, Borla, CC305...
*288 rwhp / 312 tq
Best run to date:
13.384 @ 107.42
*Numbers before cam
Don't question the great...just enjoy us
My '97 Z28 (http://www.geocities.com/lt1_97z28)