|
||
datamaster ????kandied91z 09-14-2002, 01:08 PM i'm having trouble getting my datamaster software to communicate with my aldl on my 91 OBDI... the software only comes up with a com 4. i only have com 1. anyone else ever have this problem or have an idea on what i can do to fix it? Highlander 09-14-2002, 10:43 PM You have more of a windows issue than a Datamster issue.. Check your installation and your drivers or so and restart or upgrade to a different OS. I recommend winxp.. ------------------ 94B4C M6 Finishing project Borla Competition-- AFR Heads 383 + Paxton Supercharger :D Rufus 09-15-2002, 12:22 AM Check the AKM website, Andrew has some information on torubleshooting serial port problems. Also, look in the datamaster manual, there is a section on solving communication problems. I agree with Highlander, this is most likely a PC configuration issue. Check the windows device manager under "Ports" and look for disabled ports of conflicts. You may also have to go into the PC BIOS Setup and enable a port if it is turned off! HTH, Gary ------------------ 1984 Volvo "sleeper" with 94 LT1 A4 | ||