93 Z28 for sale, 6-speed!
Thread Starter
Registered User
Joined: Jun 2003
Posts: 16
1993 Camaro Z28 for sale, 6-speed! Pittsburgh, PA
The wife and I are finally allowing this wonderful car to slip from our grip because financially it does not make sense for us anymore.
Here's the history: I bought it last july with 105K miles on it. I put new tires (245/50/16) on it, new performance friction carbon metallic pads all the way 'round, pulled the heads (blew a gasket)and had them milled for flatness, very mild porting job, and put it back together with factory quality gaskets etc.. I also cleaned it up a bit, new window/lock switches etc...
Now it has 111K miles on it, I have also put an ignition module on it other than that it has been my daily driver and very reliable, doesn't use or leak any fluids.
Here's the specs:
1993 Z28 , solid roof no t-tops, 6 speed, power everything, ice cold A/C, red with black/graphite interior, Bose sound, Posi, Factory oil cooler which someone told me is part of some sort of heavy duty factory package or came with the higher ratio rear end?
The car is mechanically excellent, but could use some cosmetic clean up. It was in florida until 5 years ago, no rust. It has a small dent on the left rear corner that was there when I bought it, it is sheetmetal damage and could be straightened out. The previous owner had the interior very dirty, and I have cleaned most of it, but it could use a better detail. There are a few other minor things to fix, but nothing time consuming or expensive. I will be working on these when i have time, which is just about never, but if I get to it before a buyer comes along some of these things will be fixed.
The car is PA inspected to 5/04, and ready to be a daily driver if you need it to. It is located near the Pittsburgh PA airport. around here similar cars seem to ask about $5,000, mine needs a little cleanup so I'm asking 4,500, make an offer.
Perry
412-269-0738
perryseaman@hotmail.com
Here's the history: I bought it last july with 105K miles on it. I put new tires (245/50/16) on it, new performance friction carbon metallic pads all the way 'round, pulled the heads (blew a gasket)and had them milled for flatness, very mild porting job, and put it back together with factory quality gaskets etc.. I also cleaned it up a bit, new window/lock switches etc...
Now it has 111K miles on it, I have also put an ignition module on it other than that it has been my daily driver and very reliable, doesn't use or leak any fluids.
Here's the specs:
1993 Z28 , solid roof no t-tops, 6 speed, power everything, ice cold A/C, red with black/graphite interior, Bose sound, Posi, Factory oil cooler which someone told me is part of some sort of heavy duty factory package or came with the higher ratio rear end?
The car is mechanically excellent, but could use some cosmetic clean up. It was in florida until 5 years ago, no rust. It has a small dent on the left rear corner that was there when I bought it, it is sheetmetal damage and could be straightened out. The previous owner had the interior very dirty, and I have cleaned most of it, but it could use a better detail. There are a few other minor things to fix, but nothing time consuming or expensive. I will be working on these when i have time, which is just about never, but if I get to it before a buyer comes along some of these things will be fixed.
The car is PA inspected to 5/04, and ready to be a daily driver if you need it to. It is located near the Pittsburgh PA airport. around here similar cars seem to ask about $5,000, mine needs a little cleanup so I'm asking 4,500, make an offer.
Perry
412-269-0738
perryseaman@hotmail.com
Last edited by LPerry; Feb 12, 2004 at 09:17 AM.
Registered User
Joined: Nov 2002
Posts: 1,303
From: Jamestown, NY J&P MUscLE
Originally posted by LPE Z convt
where are you located
where are you located
Do you have any pics you could send me, Thanks,
-John
Gonewiththewindfarm@hotmail.com
Thread Starter
Registered User
Joined: Jun 2003
Posts: 16
Hi All,
I'm working on some pics, it's taking me a while because my schedule is very rough right now and being home in the daylight to snap photos is proving difficult. Plus I'd like to wash it first and it's real cold out. I'll get some pics out one way or another in the next day or two. I get a lot of compliments on it, it's a nice ride.
Perry
I'm working on some pics, it's taking me a while because my schedule is very rough right now and being home in the daylight to snap photos is proving difficult. Plus I'd like to wash it first and it's real cold out. I'll get some pics out one way or another in the next day or two. I get a lot of compliments on it, it's a nice ride.
Perry
Thread
Thread Starter
Forum
Replies
Last Post
NewsBot
2010 - 2015 Camaro News, Sightings, Pictures, and Multimedia
0
Dec 3, 2014 12:30 PM
chevroletfreak
LT1 Based Engine Tech
202
Jul 4, 2005 05:00 PM