Anyone ever use "Dupli-Color" vinyl and fabric color?

It comes in a spray-paint can. It says it's good for: upholstery, carpet, door panels, seat trim, dashboards, and more. I'm converting my interior from dark gray to black. I want to use this on my carpet and maybe my dash and the material on my door panels.
By the way: So far I've painted most of the plastic semi-gloss black and it looks damn good http://web.camaross.com/bb/smile.gif I've followed a few guides on here, this appearance section is cool. If you get a chance, check out the ride in my sig......

------------------
1993 Trans Am, Exterior: Orange paint, black roof, cowl hood. Performance: Coan 3000-3500 Stall, Moroso CAI, Aluminum DS, Richmond 3.73's, pcmforless programming, flowtech cutout, !TB, !cat, flowmaster.
speed density message board (http://pub26.ezboard.com/b93fbodymessageboard)
Ever seen an orange Trans Am? (http://members.sounddomain.com/orangetransam)

I changed my whole interior from the stock light / dark gray trim to all black, (with the exception of my seats, which I changed the inner part to red). Anyway....I used VHT Color Dye. I did a write up on my site on page 14 if your interested. Pictures included.

~John

------------------
1994 Z Car (http://camaroz28.cardomain.com/id/central_pa_z)
www.slfba.com (http://www.slfba.com)
The usual stuff on a set of Nittos and a dead posi.
60' = 1.920
1/8 = 8.368 @ 83.88
1/4 = 12.968 @ 108.04

<font face="Verdana, Arial" size="2">Originally posted by Central PA Z:
I did a write up on my site on page 14 if your interested. Pictures included.

~John

</font>Actually, this is the guide I used http://web.camaross.com/bb/smile.gif I didn't want to order the VHT and wait for it to get here and nobody around here carries it, so I bought the dupli-color stuff from my neighborhood parts store. I'll try it where no one can see it and if it looks good I'll keep using it, if not I'll go get the VHT stuff. Thanks for the info bro!



------------------
1993 Trans Am, Exterior: Orange paint, black roof, cowl hood. Performance: Coan 3000-3500 Stall, Moroso CAI, Aluminum DS, Richmond 3.73's, pcmforless programming, flowtech cutout, !TB, !cat, flowmaster.
speed density message board (http://pub26.ezboard.com/b93fbodymessageboard)
Ever seen an orange Trans Am? (http://members.sounddomain.com/orangetransam)

that interior is nice the one with the black interior and red middle part of the seat

do u wanna give me a detailed explanation of what u did ??? did u take it all off or no

------------------
Ran 13.398 with shi*ty stock bald tires havn't run with the nittos yet.
AOL SN: stik6shift98
1998 Camaro Z-28 (http://community.webshots.com/album/40735735vCqqLE)

Check the sig.Dupli-color black upholstery dye from Wal-mart.Plus a little bowtie decal from Autozone to add definition.I simply taped the middle,stuck the decal on the headrest,painted,and then removed the tape and the decal.Really easy.
Kevin

------------------
1998 Black Z28 A4
-------1/8-------
8.584 @ 83.64 MPH
Taylor 10.4mm wires,!EGR,!FRA,SLP Lid,MAF Ends,Manual Fan Switch,and Dynomax Cat-back

BMR STB and Sub-frame Connectors

Pics (http://photos.yahoo.com/bc/nikkev1/lst?.dir=/New+Camaro&.view=t)

<font face="Verdana, Arial" size="2">Originally posted by nikkev:
Check the sig.Dupli-color black upholstery dye from Wal-mart.Plus a little bowtie decal from Autozone to add definition.I simply taped the middle,stuck the decal on the headrest,painted,and then removed the tape and the decal.Really easy.
Kevin

</font>cool,the bowtie looks good http://web.camaross.com/bb/smile.gif I used this stuff on my carpet and it looks good.



------------------
1993 Trans Am, Exterior: Orange paint, black roof, cowl hood. Performance: Coan 3000-3500 Stall, Moroso CAI, Aluminum DS, Richmond 3.73's, pcmforless programming, flowtech cutout, !TB, !cat, flowmaster.
speed density message board (http://pub26.ezboard.com/b93fbodymessageboard)
Ever seen an orange Trans Am? (http://members.sounddomain.com/orangetransam)

<font face="Verdana, Arial" size="2">Originally posted by nikkev:
Check the sig............I simply taped the middle,stuck the decal on the headrest,painted,and then removed the tape and the decal.Really easy.
Kevin

</font>

Kevin, yours turned out pretty nice. So you used the Dupli-Color instead of the VHT stuff I used?? Did you have to vaccum the seats after they dried?? I had very small little balls of dye that cought on the fabric that had to be removed with the bristle brush on the vaccum cleaner. Maybe it's just my seats. Anyway.....looks good!!

~John

just did my interior with this stuff and finished last night. love it so far, check out pics in sig.

------------------
99 Z28 M6, Black, SS Hood, Sport Appearance Pkg., RKsport Front Fascia Spoiler, Direct Flo Lid, K&N, !MAF, TBB, !FRA, Air Dam Intake, !EGR, B&M Ripper, Hooker Classic European Dual/Dual Tips, Cut-Out, Torq Thrust II 17x9.5's w/ Hankook Ventus 255/40/17's(front) & 17x11's w/ Yokohama AO32R 315/35/17's(rear)
336 RWHP
http://www.geocities.com/vendela99z28/99camaroZ28.html
Pics Updated 7/18/02

<font face="Verdana, Arial" size="2">Originally posted by Central PA Z:
Kevin, yours turned out pretty nice. So you used the Dupli-Color instead of the VHT stuff I used?? Did you have to vaccum the seats after they dried?? I had very small little balls of dye that cought on the fabric that had to be removed with the bristle brush on the vaccum cleaner. Maybe it's just my seats. Anyway.....looks good!!

~John

</font>

Nope,I didn't have anything on my seats after I was done.I did vaccum the seats before I dyed them though.The thing that sucks though is that the seats now show every single little piece of lint and string.God only knows why I picked black http://web.camaross.com/bb/eek.gif http://web.camaross.com/bb/biggrin.gif
Kevin



------------------
1998 Black Z28 A4
-------1/8-------
8.584 @ 83.64 MPH
Taylor 10.4mm wires,!EGR,!FRA,SLP Lid,MAF Ends,Manual Fan Switch,and Dynomax Cat-back

BMR STB and Sub-frame Connectors

Pics (http://photos.yahoo.com/bc/nikkev1/lst?.dir=/New+Camaro&.view=t)