Are there any suspension parts on my 85' IROC Z28 that I could swap over to my V6 that would be a good improvement over the stock suspension parts?
The Z28 is getting a rebuilt series 3 carrier 10 bolt with a brand new Eaton I picked up from ebay last year and 3.73 gears.
The V6 rear is getting freshend up with new bearings, seals and a Torsen LSD from slp(for a $100 no reason why every one shouldn't have one).
I could have them done at the same time so it would be no problem to put new parts on the Z28 and trade the old ones over to the V6(if there better).

 

swaybar is thicker and panhard bar, maybe springs they should be a bit lower.. what about brakes? oh and see if it has a wonderbar not sure if it would switch but worth a look into