Anyone need mods installed?

If you are looking to get any thing installed on a LT1 or a LS1 email me. I can do heads and cam, clutches, converters, head porting, n2o installs, guage installs and lots more. Email me with what you want done. Prices are very resonable.

Thanks
Joe

I would be interested in a Hotcam kit install and minor head porting. What would you charge. I am just wanting a streetable 12 sec car. Go figure. I would want to get this done some time after mid December (bonus check). Thanks,

Kyle

------------------
95 a4, 3.42 gears, SLP Headers, Flowmaster catback, Suncoast Creation's functional Z style hood, 17x9 SS wheels, PCMForless.com Program

"All cars are created equal, I'm just a better driver!"

Joe, where are you located? I'm in Austin and I will be getting parts together very soon for a valve train upgrade. Shoot me an e-mail if you want.

Chris

ill beat all of his prices by 50% http://web.camaross.com/bb/biggrin.gif

<font face="Verdana, Arial" size="2">Originally posted by mr diabolical:
ill beat all of his prices by 50% http://web.camaross.com/bb/biggrin.gif</font>

But can you beat the quality by 50% http://web.camaross.com/bb/tongue.gif

Fuel pump install.

How much?

Where are you located?

I'm located in Wichita Falls it's about a 1 1/2 hour drive north of D/FW.

Everyone should have a reply that posted or sent me an email.

Thanks!
Joe

------------------
385RWHP and 350RWTQ N/A Mods yeah a few!

[This message has been edited by Smoke T/A (edited July 31, 2002).]

i just sent you mail

Joe kicks a$$! He installed my cam and polished my heads for a very inexpensive price. He's a really nice guy. Just look at my sig. I am very happy. http://web.camaross.com/bb/smile.gif I highly recommend Joe. You will not believe how hard this guy works.


Mark

------------------
Stock 96TA,M6,with K&N cold air,March pulleys,MAF descreened,polished heads,CC503,Crane 1.6 RR's,LT-4 KM,BBK 52mm TB,PCMFORLESS programming,160*,Richmond 4.10s,MAC shorty headers,!EGR,!CATS,NGK TR55 plugs,Flowmaster Exhaust, Cutout,TB Bypass,!CAGS,SPEC Stage II Kevlar,AL. Driveshaft,BFG DR's,Dyno 352.2 RWHP!

He definitely knows what he's doing. I'd recommend him to anyone who needs stuff done.
He's worked on my car a few times.
Michael

------------------
Black 94Z A4 t-tops
324rwhp/316rwtq (needs more tuning)
The Z (http://www.michaelpoirot.cz28.com)

<font face="Verdana, Arial" size="2">Originally posted by Smoke T/A:
I'm located in Wichita Falls it's about a 1 1/2 hour drive north of D/FW.

Everyone should have a reply that posted or sent me an email.

Thanks!
Joe

</font>
And hope you don't catch a hail storm on the way to hail central AKA Witchita Falls??

So do you have a garage and do the work there or do you commute?

Do any tranny work? T56 type?



------------------
Adam in Hurst TX
95TA M6 Borla Cat Back
!TB,!MAF,Ripper,Tuner Cat
HP160, !UD pulley,CAI
Best 1/4 13.79 101.4

Houston area peeps...we can do installs for you also. e-mail me @joshrys@hotmail.com for inquiries...

------------------
'97 Trans Am (http://www.streetillusionsracing.com/Pics/mysticta1.jpg) Mystic, A4 13.41 @ 102.9
Minor engine mods - Hooker Long tubes (http://www.streetillusionsracing.com/Josh/hookerlt1.jpg), ASP underdrive pulley, K&N CAI, Hooker Cat-back (http://www.streetillusionsracing.com/Josh/Image013md.jpg), Custom y-pipe (http://www.streetillusionsracing.com/Josh/ypipe.jpg), MSD 8.5mm wires (Over the valve covers) (http://www.streetillusionsracing.com/Josh/otvc1.jpg)
1LE suspension (springs, swaybars, elbow), BMR LCA's and PHR, Granatelli STB (http://www.streetillusionsracing.com/Josh/stb1.jpg)
Appearance Mods Polished Valve Covers (http://www.streetillusionsracing.com/Josh/finishedvc2.jpg), Konig Flight rims (17x9.5) (http://www.streetillusionsracing.com/Josh/flight2.jpg), Clear corners (http://www.streetillusionsracing.com/Josh/Image012md.jpg), Macewen Silver Guages (http://www.streetillusionsracing.com/Josh/guagesdone.jpg)
www.streetillusionsracing.com (http://www.streetillusionsracing.com)
My Page (http://www.streetillusionsracing.com/Josh/main.htm)
Install Page (http://www.streetillusionsracing.com/Install/install.htm)

[/B][/QUOTE]
And hope you don't catch a hail storm on the way to hail central AKA Witchita Falls??

So do you have a garage and do the work there or do you commute?

Do any tranny work? T56 type?

[/B][/QUOTE]

Well I don't think it hails here very often??? But I only know of 1 time in the last 2 years that it has hailed golf ball size or larger?? No garage at the house but I will commute to a place if need be?

Sorry no internal work on T56 just clutches.

Joe

[This message has been edited by Smoke T/A (edited July 31, 2002).]

[/b][/QUOTE]
And hope you don't catch a hail storm on the way to hail central AKA Witchita Falls??
[/B][/QUOTE]

Hail claim = mod money

I think I'll drive down to Hurst, TX where they sell those hail damaged cars. http://web.camaross.com/bb/wink.gif I purchased my first firebird(v6) down there. Don't worry about Joe having a garage. He will get it done so fast there wouldn't be time to close the garage door. http://web.camaross.com/bb/biggrin.gif

Think faster,

Mark

------------------
Stock 96TA,M6,with K&N cold air,March pulleys,MAF descreened,polished heads,CC503,Crane 1.6 RR's,LT-4 KM,BBK 52mm TB,PCMFORLESS programming,160*,Richmond 4.10s,MAC shorty headers,!EGR,!CATS,NGK TR55 plugs,Flowmaster Exhaust, Cutout,TB Bypass,!CAGS,SPEC Stage II Kevlar,AL. Driveshaft,BFG DR's,Dyno 352.2 RWHP!

I'll be looking for you when I get some extra money! http://web.camaross.com/bb/biggrin.gif

The reason Joe's so fast is because he's got the whole dang car memorized.

TEST: For Joe,

How many bolt's in each head?

How much do you torque the intake bolts?

I bet he doesn't have to look it up.

Thanks Joe for making my car totally bad a$$!

Mark



------------------
Stock 96TA,M6,with K&N cold air,March pulleys,MAF descreened,polished heads,CC503,Crane 1.6 RR's,LT-4 KM,BBK 52mm TB,PCMFORLESS programming,160*,Richmond 4.10s,MAC shorty headers,!EGR,!CATS,NGK TR55 plugs,Flowmaster Exhaust, Cutout,TB Bypass,!CAGS,SPEC Stage II Kevlar,AL. Driveshaft,BFG DR's,Dyno 352.2 RWHP!

<font face="Verdana, Arial" size="2">Originally posted by 96TAblur:
</font>

Hail claim = mod money

I think I'll drive down to Hurst, TX where they sell those hail damaged cars. http://web.camaross.com/bb/wink.gif I purchased my first firebird(v6) down there. Don't worry about Joe having a garage. He will get it done so fast there wouldn't be time to close the garage door. http://web.camaross.com/bb/biggrin.gif

Think faster,

Mark

[/b][/QUOTE]

Yeah I looked at a Z28 when I was hunting and it looked so goofy, dents all over hood, roof, and rear fenders only, That's when I first found out about the FG parts.

<font face="Verdana, Arial" size="2">Originally posted by 96TAblur:
The reason Joe's so fast is because he's got the whole dang car memorized.

TEST: For Joe,

How many bolt's in each head?

How much do you torque the intake bolts?

I bet he doesn't have to look it up.

Thanks Joe for making my car totally bad a$$!

Mark

</font>

Well let me see?

I belive there is 17 bolts in each head so a total of 34 same as any SBC

Intake bolts should be torqued to 30 or 35,but its one of those 2,in at least 2 passes, first being about 20ft/lb.

Anymore brain busters???? http://web.camaross.com/bb/tongue.gif

Did you say ASS?? http://web.camaross.com/bb/biggrin.gif

I wish i could make more peoples cars bad ass. http://web.camaross.com/bb/biggrin.gif

<font face="Verdana, Arial" size="2">Originally posted by Smoke T/A:
Well let me see?

I belive there is 17 bolts in each head so a total of 34 same as any SBC

Intake bolts should be torqued to 30 or 35,but its one of those 2,in at least 2 passes, first being about 20ft/lb.

Anymore brain busters???? http://web.camaross.com/bb/tongue.gif

Did you say ASS?? http://web.camaross.com/bb/biggrin.gif

I wish i could make more peoples cars bad ass. http://web.camaross.com/bb/biggrin.gif</font>


hey wanna help me swap cams in about a month? ill drive there, ill even pay you for helpin. it sucks when your doing it by yourself and realize you dont have something and have no ride to the parts store http://web.camaross.com/bb/mad.gif i will even pick up some beers if you drink?

<font face="Verdana, Arial" size="2">Originally posted by mr diabolical:

hey wanna help me swap cams in about a month? ill drive there, ill even pay you for helpin. it sucks when your doing it by yourself and realize you dont have something and have no ride to the parts store http://web.camaross.com/bb/mad.gif i will even pick up some beers if you drink?</font>

Yeah that's cool with me. Just let me know when you are going to come down or should i say up?

no specific date yet, but lets say around labor day weekend? ive already got the cam, was gonna do the swap already but im just changing intakes for right now. no place to do work. (i think thats the first weekend in september)

Joe,

Got a guestion for you regarding that stupid water pump driveshaft seal. I will e-mail you also.

Michael

------------------
1995 Formula, 355 Forged, ATI Super Damper, M6, B&M Shifter, Spec Stage 3 Carbon Clutch, 4.10, 1LE Drive Shaft, CAI, CC 306 Cam, Pro Mag 1.6 RR's, Hooker LT, 58mmTB, AFPR, 26 lb. inj., Stage 2 Heads, 1LE Elbow, MSD6AL, NGK TR55, LT4KM, !AIR, !EGR, !CAT, BMR SFC, BMR STB, BMR Boxed LCA, BMR Panhard

[This message has been edited by Black95Form (edited August 02, 2002).]

<font face="Verdana, Arial" size="2">Originally posted by Black95Form:
Joe,

Got a guestion for you regarding that stupid water pump driveshaft seal. I will e-mail you also.

Michael

</font>

Replied C'mon people! No one wants me to make there car faster??????

[This message has been edited by Smoke T/A (edited August 05, 2002).]

I want you to help my car look faster, http://web.camaross.com/bb/smile.gif http://web.camaross.com/bb/smile.gif How about lowering springs, Adj. panhard rod, and lower controle arms??? How much to insall all of that. let me know Ill come to you.
Steve
And why not install my underdrive pully???

------------------

1996 Z28, A4, It changes colors?, 69 Z28 Badges, 3:23's, K&N FIPK, cutout, Moroso Blue Max wires, NGK TR-55s, LT4KM, Hotchkis STB, 1LE Elbow, Clear turns, 17X9.5 LG World challange wheels, 275/40 Nitto DR'S RWHP:265/RWTQ:294 1/4mile:13.6mph: 103

How much to install a new rotator splint http://web.camaross.com/bb/wink.gif?

------------------
My Camaro & Mustang (http://camaroz28.cardomain.com/member_pages/view_page.pl?page_id=157853)
1994 Camaro Z28 A4
------------------
Heads, cam, LT's ~336 rwhp, 331 rwtq~
1989 Mustang LX 5.0
------------------
Coast High 347, Twin T3 Turbos...

Hey joe, how much to have a CC XE 230/236 cam, lifters, springs (valve), pushrods, electric waterpump, double roller timing cover, and all gaskets including the intake manifold gasket? Also, how much for a say stage 1 porting on top of all that? Please let me know, but I won't be able to get with you until around october(after the Bowling green fbody gathering). Thanks


------------------

1997 Camaro 30th SS, 6spd, Hardtop, fully loaded,Hooker Long Tubes, custom ypipe, !cats, Ed wright custom computer upgrade, 160 thermo, Hugger Orange BMR STB, BMR LCAs, DD SFC, BMR adjustable PHR
!CAGS, white face gauges, Hotchkis springs, Bilstein shocks
BMR relocation brackets, 1LE front and rear sway bars, Hugger Orange BMR torque arm, Taylor 8mm plug wires (universal), NGK TR55s, Made for you looms (over the valve cover set),

Coming Soon:GTP Stage II LT4 heads, GTP-6 cam, ported LT4 intake manifold, 58mm TB, full valvetrain upgrade

<font face="Verdana, Arial" size="2">Originally posted by ZerokoolSS:
Hey joe, how much to have a CC XE 230/236 cam, lifters, springs (valve), pushrods, electric waterpump, double roller timing cover, and all gaskets including the intake manifold gasket? Also, how much for a say stage 1 porting on top of all that? Please let me know, but I won't be able to get with you until around october(after the Bowling green fbody gathering). Thanks


</font>

You have mail http://web.camaross.com/bb/biggrin.gif

TTT

<font face="Verdana, Arial" size="2">Originally posted by Smoke T/A:
Replied C'mon people! No one wants me to make there car faster??????

[This message has been edited by Smoke T/A (edited August 05, 2002).]</font>

sent you mail I do I do http://web.camaross.com/bb/smile.gif


------------------
1997 Firebird Formula
GTP stage II heads
52mm BBK throttle body
GTP extreme CAM
Ported Intake
Hooker Headers coated shorties
Borla Exhaust
3.73's
Bilsteins
Eibach
SLP cold air
NX 2nd GEN 125 shot
BMR Torque Arm
BMR SFC
BMR Control Arms
BMR Panhard Rod

Installed some headers for Mike Laman. BTW he had the cleanest car I have ever seen. Still looking to install more parts.

Joe

T^T

Joe I live here in Wichitity and am considering a cam swap. Where can I find you? Will you teach me if I pay you for the install? By the way I drive the 35th LE Vert.

Kobwo

P.S. wouldn't mind getting together and talking sometime.

ttt