AHARTZ28
07-30-2002, 09:42 PM
i have (2) 3" LS1 aluminum driveshafts for sale one has 3k on it i used for a california,the other has 11k on it
$150 each
------------------
1994 Z28 A4
383 scat 9000 series crank, eagle rods, wiseco 12:1 pistons CC306,TCI Streetfighter,HOOKER LT's,Meziere H20 pump,LT1 Edit,95+ opti
1/4:11.89
11.64 corrected
MPH:115.23
1/8th:7.6x
60':1.77
The Beast (http://albums.photopoint.com/j/AlbumIndex?u=883128&a=9217559)dual exhuast (http://www.angelfire.com/ar2/redfeeling/Camaro/duals.html)
bad95z28
07-30-2002, 11:01 PM
I might be interested in one. Would that be $150 shipped? Would I need anything other than some u-joints to install it? Shoot me an email.
mikep453@yahoo.com
------------------
Black 94Z A4 t-tops
324rwhp/316rwtq (needs more tuning)
The Z (http://www.michaelpoirot.cz28.com)
jkayner
07-31-2002, 12:18 PM
hey can you do me a favor? i just bought a ls1 ds and the isntaller said i had the wrong u-joints for it. Can you measure the caps to see if they ar the same size all around?
------------------
'97 Trans Am (http://www.streetillusionsracing.com/Pics/mysticta1.jpg) Mystic, A4 13.41 @ 102.9
Minor engine mods - Hooker Long tubes (http://www.streetillusionsracing.com/Josh/hookerlt1.jpg), ASP underdrive pulley, K&N CAI, Hooker Cat-back (http://www.streetillusionsracing.com/Josh/Image013md.jpg), Custom y-pipe (http://www.streetillusionsracing.com/Josh/ypipe.jpg), MSD 8.5mm wires (Over the valve covers) (http://www.streetillusionsracing.com/Josh/otvc1.jpg)
1LE suspension (springs, swaybars, elbow), BMR LCA's and PHR, Granatelli STB (http://www.streetillusionsracing.com/Josh/stb1.jpg)
Appearance Mods Polished Valve Covers (http://www.streetillusionsracing.com/Josh/finishedvc2.jpg), Konig Flight rims (17x9.5) (http://www.streetillusionsracing.com/Josh/flight2.jpg), Clear corners (http://www.streetillusionsracing.com/Josh/Image012md.jpg), Macewen Silver Guages (http://www.streetillusionsracing.com/Josh/guagesdone.jpg)
www.streetillusionsracing.com (http://www.streetillusionsracing.com)
My Page (http://www.streetillusionsracing.com/Josh/main.htm)
Install Page (http://www.streetillusionsracing.com/Install/install.htm)
AHARTZ28
07-31-2002, 07:00 PM
<font face="Verdana, Arial" size="2">Originally posted by jkayner:
hey can you do me a favor? i just bought a ls1 ds and the isntaller said i had the wrong u-joints for it. Can you measure the caps to see if they ar the same size all around?
</font>
if it is a stock LS1 ds then it will fit ,if he dont want to install it bring it by i will
------------------
1994 Z28 A4
383 scat 9000 series crank, eagle rods, wiseco 12:1 pistons CC306,TCI Streetfighter,HOOKER LT's,Meziere H20 pump,LT1 Edit,95+ opti
1/4:11.89
11.64 corrected
MPH:115.23
1/8th:7.6x
60':1.77
The Beast (http://albums.photopoint.com/j/AlbumIndex?u=883128&a=9217559)dual exhuast (http://www.angelfire.com/ar2/redfeeling/Camaro/duals.html)
ucrazymonkey
08-01-2002, 06:41 PM
Ok Ryan heres the deal. Shoot me a price for the following..
1. Install plugs, wires, belt and fuel filter. I provide the parts and you do the install.
2. Install TB Airfoil (yours)
3. Install LS1 driveshaft (yours)
Give me a price for your LS1 driveshaft and TB airfoil and all the labor to do what is said above. Please email me at ucrazymonkey@cs.com though. Dont want the prices posted to the public. Thanks Nathan