Getting ri d of some personal goodies to move in a different project direction. BEST reasonable offer on everything.

Comp Gold 1.6 Self-Aligning roller rockers: Less than 9K miles w/ synthetic fluid: $240

LT1 bottom end/ rotating assembly. Stock, was purchased to build up. Was running when it came out of seller's car w/ no knock or problems. Pistons appear to have been "banged on" w/ a mallet by previous owner. I depth guaged them and they are still usable, just cosmetically damaged. turns over easily by hand.
$450 OBO

Stage II ported & polished LT1 heads: Ported by Vinci Dyno tune w/ matching ported and ceramic coated intake. Stock valves but complete port job. Car went 11.87 @ 114.7 in good weather w/ a 1.70 launch and an LT4 Hot cam combined w/ these heads. Still on car, will remove, inspect, clean, and deck IF necessary. Optional valves below. $1050.00 OBO w/ intake manifold

Manley 2.02"/1.6" Raceflow valves for LT1. Very large valve for serious flowing heads. Will add appx 15-20 rwhp to above heads.
Stainless Steel. $100 obo

Stock LT1 intake manifold. Includes EGR stuff. Dirty but in good condition.
$150 OBO **Will not sell if above ported manifold sells.**

BBK 1 5/8" shorty headers. Have been reworked to fit considerably better than stock. Welds have been redone and ground, bolt-holes have been head-matched, flanged has been slightly decked (.010") to get into plane. NO EGR or AIR. Not the best header available but w/ the modifications gets the job done. Includes y-pipe w/ welded on cat delete pipe. $225 obo.

Complete 3.73 geared 10-bolt w/ T/A aluminum girdle. Ran fine in car, makes some noise but has since new gears 14,000 miles ago. May need posi-rebuild down the road...only slipped on one occasion 2,000 miles ago and handled 390+ rear wheel horsepower after the slip w/ out repeat. Entire rear end assembly included...axles, housing, caliper mounts...everything!
$450 Firm.

 

I want the rear. I'll try to work something out for the money.

 

You sellin the car too?

 

Eddie, just let me know. It's still in the car which is up in Eustis right now, so it'll probably take me about a week to get up there and take it out.

Drew, not planning on selling the car but if someone came to me w/ $5K I'd sell it w/ ALL the mods plus the extra bottom end.

 

I'm interested in the BBK's. Let's work something out...

 

bump for brett, hes always a good seller.

someone steal those heads, thats an awesome deal!

i would, but i have some on the way already.

 

Update:

Rear End: Pending*

Headers/Y-pipe SOLD

 

Yeah those heads are pretty badass. If I had the money i'd definitely steal 'em. 114.7 MPH in a stalled auto with a hotcam is damn impressive.

 

Brett,


I'll take the rear for sure, got the money. Let me know when I can come by to pick it up or whatever, and do you think you could help me put it in my car?


Let me know...

 

Eddie, I may be able to get the rear end this weekend. That's depending on how long it takes me to finish up a head-job on a Cavalier I'm in the middle of. Worst case it'd be the next weekend. Drop me an email w/ your number and I'll arrange to bring it by your place. Yeah, I can help you bolt it up. It's very easy but a 2 person job.

 

Eddie email sarkj@ocps.net he is looking for a posi disk brake rear adn will give you 150 for yours... His number is 407-249-8204 he has the white bird...

 

Will do.


Sounds good to me, I was kinda thinking about keeping my rear, kind of a just in case type of thing, lol... but I'll prolly let it go.

 

Brett, you've got mail.

 

Headers & Y-pipe: SOLD to 94GreyV6

Rear End: SOLD to '94 Bad A Z28

1.6RRs: Pending* ebay

 

Way to spell my name wrong jerk!