PAGING: NOMAD

I guess since your e-mail doesn't work we will do all communication on here. Post here so I know your fiancee gave you the message. Also, if you can't send the one you are working on by Friday then just send the one you said you sent but came back. Please have something in the mail by Friday and let me know when to expect it. Thanks.

Well, I finally got to this one..lol
I've been reading through the bad responses from all the junior members who seen your post... Oh well, i'm strictly doing ebay now since i can make some serious money on there.. i was only making about $20 off each TB i done on here...

Anyways....

I need your mailing address badly !!! PLEASE post it so i can ship this thing tommorrow...
I've got you a 52mm, with a integrated airfoil http://web.camaross.com/bb/smile.gif i made it for my car, but since i'm having so much trouble, i'm gonna give it to you to make up for what happened.
It's fully polished throughout with an airfoil epoxied on, and matched perfectly to the bores. It is a real piece of work which i'm very proud of.

Let me know where to send it ASAP http://web.camaross.com/bb/smile.gif

BTW, on the other one, I'm going to order blades tonight, so they should be here around tuesday. If you want to send the other one back right now, I can slide the blades in that one.

Lemme know for sure...

-Shannon

------------------
"Yep, getting drunk at the ol' flower shop"~ Homer Simpson
Http://nomad.cz28.com
Need to Buy stock Throttle Bodies...Email me
'95 White Z-28 T-Tops
Cold Air Intake, Ported MAF, Ported Heads, B&M shift firmer, !cat, !iat,!egr, Home Made MonoBlade, LT4 Hotcam, Cloyes, Taylor 8.5MM, Comp cams pro magnum rockers, Hooker Long Tubes, True Dual 3" exhaust, CSI Water pump, FastKitteN in the passenger seat ;)

Best ET (Stock): 13.84

It's:

Mark DeLisle
116 Reserve Cir. 204
Oviedo, Fl 32765

Thanks for the airfoil. I'll try to post pics up for everyone. This post should be a good solid line of communication. Thanks.

I'll make sure he gets this address ASAP.. http://web.camaross.com/bb/smile.gif

------------------
~Heather~
1988 Camaro rebuildin :)
http://www.FastKitteN.cz28.com
1998 Saturn SL2(ported & polished throttle body,a K&N air filter, &IAT)
1995 z28 <--Nomad's & I's
http://www.nomad.cz28.com

Shipped http://web.camaross.com/bb/smile.gif

Tracking # 045742344865947
Sent it Fed Ex http://web.camaross.com/bb/smile.gif

-Shannon

------------------
"Yep, getting drunk at the ol' flower shop"~ Homer Simpson
Http://nomad.cz28.com
Need to Buy stock Throttle Bodies...Email me
'95 White Z-28 T-Tops
Cold Air Intake, Ported MAF, Ported Heads, B&M shift firmer, !cat, !iat,!egr, Home Made MonoBlade, LT4 Hotcam, Cloyes, Taylor 8.5MM, Comp cams pro magnum rockers, Hooker Long Tubes, True Dual 3" exhaust, CSI Water pump, FastKitteN in the passenger seat ;)

Best ET (Stock): 13.84

see what a bit of patience can do...

can't wait to see the the pics of the tb...and and evaluation of the tb gains

laterguys

------------------
ARREST-ME RED 96 Z-28, M6 (http://www.gmmuscle.cz28.com/images/jeff.jpg)...stock for now...but i've only had it three days...1st mod on day 4! TB airfoil...NOW...G2 CAI(modified), K&N, MagnaFlow w/ cutout(closed of course), maf ends, ?cags?, UD pulley, TB bypass, 160stat, SLP fan switch (http://www.slponline.com/view_product.asp?PARTNUMBER=63011), SLP air temp module (http://www.slponline.com/view_product.asp?PARTNUMBER=63010), Hypertech PTM, MSD 6A, Hurst(SS donation) with a Lou's SStick (http://lscamaross.8m.com/lous2.html) and Proform Shiftlight (http://www.jegs.com/cgi-bin/ncommerce3/ProductDisplay?prrfnbr=39231&prmenbr=76), BMR (http://www.bmrfabrication.com) lca, phb and stb, 32/21mm sway bars w/ poly bushings and endlinks, ES poly TA mount, air silencer???

Waiting to go on: 1LE springs, SLP afpr

For Sale: stock exhaust+ sq. tips, 30/19mm sway bars w/ stock bushings

Thanks Shannon! I'll get the other one out on Monday unless it is possible just to mail me the blades. Do I need to send the whole thing in? I could wait untill I get the other one on and have the old TB core to send back to you as well. If you rather I would send the other one now then I will. Let me know, thanks!

<font face="Verdana, Arial" size="2">Originally posted by 5LITEREATER:
Thanks Shannon! I'll get the other one out on Monday unless it is possible just to mail me the blades. Do I need to send the whole thing in? I could wait untill I get the other one on and have the old TB core to send back to you as well. If you rather I would send the other one now then I will. Let me know, thanks! </font>

I definitly need you to send it. The blades are made for me with only guide holes in them. I have to suspend them in the TB for them to fit right, then make the holes bigger if needed to make the proper amount of gap in the bores. Sometimes, they fit perfectly. Mostly on the later model TB's for soem reason. I did a 93, and it really really was a pain to get them to line up.

Since this TB is going to get there around tuesday and you can't ship until monday anyways, just keep the other one until then and send the core back too. That will save a lil on shipping, and make the mass confusion a lil more bearable around here http://web.camaross.com/bb/smile.gif

Actually, let me make sure I have enough blades first. I ordered some thursday night, so i should, but i don't wanna have to make any more wait on this.

-Shannon


------------------
"Yep, getting drunk at the ol' flower shop"~ Homer Simpson
Http://nomad.cz28.com
Need to Buy stock Throttle Bodies...Email me
'95 White Z-28 T-Tops
Cold Air Intake, Ported MAF, Ported Heads, B&M shift firmer, !cat, !iat,!egr, Home Made MonoBlade, LT4 Hotcam, Cloyes, Taylor 8.5MM, Comp cams pro magnum rockers, Hooker Long Tubes, True Dual 3" exhaust, CSI Water pump, FastKitteN in the passenger seat ;)

Best ET (Stock): 13.84

I forgot..
You don't need to send anything since the the throttle shaft has already been pre set with the TPS sensor http://web.camaross.com/bb/smile.gif

-Shannon

------------------
"Yep, getting drunk at the ol' flower shop"~ Homer Simpson
Http://nomad.cz28.com
Need to Buy stock Throttle Bodies...Email me
'95 White Z-28 T-Tops
Cold Air Intake, Ported MAF, Ported Heads, B&M shift firmer, !cat, !iat,!egr, Home Made MonoBlade, LT4 Hotcam, Cloyes, Taylor 8.5MM, Comp cams pro magnum rockers, Hooker Long Tubes, True Dual 3" exhaust, CSI Water pump, FastKitteN in the passenger seat ;)

Best ET (Stock): 13.84

Is that the right tracking number? It still wasn't working. Just checking, it's probably the fact it's the weekend and that's why it's not showing up as scanned yet. Anyways, so I ship you the TB to fix and the core I owe you after I get this one? Thanks for watching and replying on here Shannon, I appreciate it!

<font face="Verdana, Arial" size="2">Originally posted by 5LITEREATER:
Is that the right tracking number? It still wasn't working. Just checking, it's probably the fact it's the weekend and that's why it's not showing up as scanned yet. Anyways, so I ship you the TB to fix and the core I owe you after I get this one? Thanks for watching and replying on here Shannon, I appreciate it!</font>

Yep, just ship those when you get this one. I actually wanna make sure I have the blades to put in that one first, so, we will wait on those (which are on their way http://web.camaross.com/bb/smile.gif )

Yeah, it's still not showing up as scanned. I think it won't be scanned until monday when it reaches it's first destination (at least thats how they explained it). Right now it's on one of those white azz trucks http://web.camaross.com/bb/biggrin.gif

-Shannon

You have recieved it by now correct ?

-Shannon

------------------
"Yep, getting drunk at the ol' flower shop"~ Homer Simpson
Http://nomad.cz28.com
Need to Buy stock Throttle Bodies...Email me
'95 White Z-28 T-Tops
Cold Air Intake, Ported MAF, Ported Heads, B&M shift firmer, !cat, !iat,!egr, Home Made MonoBlade, LT4 Hotcam, Cloyes, Taylor 8.5MM, Comp cams pro magnum rockers, Hooker Long Tubes, True Dual 3" exhaust, CSI Water pump, FastKitteN in the passenger seat ;)

Best ET (Stock): 13.84

Yes I have http://web.camaross.com/bb/smile.gif! Looks like a VERY nice piece. We are installing it tommorrow and then I will post VERY good words for you. I would have posted that I got it but this is the first chance I have had to get online. The airfoil looks awesome. Thanks Shannon!

<font face="Verdana, Arial" size="2">Originally posted by 5LITEREATER:
Yes I have http://web.camaross.com/bb/smile.gif! Looks like a VERY nice piece. We are installing it tommorrow and then I will post VERY good words for you. I would have posted that I got it but this is the first chance I have had to get online. The airfoil looks awesome. Thanks Shannon!

</font>

Were glad you like it http://web.camaross.com/bb/smile.gif
I put a good amount of time into making that airfoil seamless. I would like to do all of them like that, but it would take soooo long to do to each one.
I heard a prominent whistle when I ran mine at idle. Lol, sounds cool i think http://web.camaross.com/bb/smile.gif
If it bothers you, all you have to do is grind down the center of the airfoil a lil bit since i knife edged it.

I bought a BBK that was in a fire, so i'm reworking it to put on my car. Trying to figure out some hidden Nitrous Passages http://web.camaross.com/bb/biggrin.gif Hopefully I'll be able to do something on the stock ones soon http://web.camaross.com/bb/wink.gif

-Shannon

TTT

-Shannon

------------------
"Yep, getting drunk at the ol' flower shop"~ Homer Simpson
Http://nomad.cz28.com
Need to Buy stock Throttle Bodies...Email me
'95 White Z-28 T-Tops
Cold Air Intake, Ported MAF, Ported Heads, B&M shift firmer, !cat, !iat,!egr, Home Made MonoBlade, LT4 Hotcam, Cloyes, Taylor 8.5MM, Comp cams pro magnum rockers, Hooker Long Tubes, True Dual 3" exhaust, CSI Water pump, FastKitteN in the passenger seat ;)

Best ET (Stock): 13.84

Been out of the area working. I got the two TB's off to you today though. They should be there Monday. I just posted this in the Lounge and For Sale section:

Topic: NOMAD's TB's are AWESOME!!!

"Little trouble in the lines of communication in the beginning, as some of you may have read, but that was beyond his control. He is definetly a man of his word. I have received a TB from him that is AWESOME! It's a 52mm and has NO IDLE problems. The port job is awesome and the blades look great. I would highly recommend him to anyone on this board (call each other though, more efficient than e-mail) and the price is unbeatable."

Man, thats makes me sooo happy to know everything is working ok.
I just shipped one off that looks almost as good as the one I sent. It's getting easier and better every time I do one.
This one took 2 weeks, counting the fact we had Memorial day and election day. My next is looking like one week http://web.camaross.com/bb/smile.gif

I do appreciate the fact that you stuck with me through all of this.
I really appreciate the kind words also http://web.camaross.com/bb/smile.gif I'm just glad that your happy http://web.camaross.com/bb/smile.gif

-Shannon

------------------
"Yep, getting drunk at the ol' flower shop"~ Homer Simpson
Http://nomad.cz28.com
Need to Buy stock Throttle Bodies...Email me
'95 White Z-28 T-Tops
Cold Air Intake, Ported MAF, Ported Heads, B&M shift firmer, !cat, !iat,!egr, Home Made MonoBlade, LT4 Hotcam, Cloyes, Taylor 8.5MM, Comp cams pro magnum rockers, Hooker Long Tubes, True Dual 3" exhaust, CSI Water pump, FastKitteN in the passenger seat ;)

Best ET (Stock): 13.84

I'll be sending back your way tommorrow looks like http://web.camaross.com/bb/smile.gif
Last week was kind of rough with me having to go to the ER for shavings in my left eye..Ouch !!

I seen you were hoping to do a hotcam soon ? I might have the one coing out of my car, and i would make you a good price if it's in good shape.

-Shannon

------------------
"Yep, getting drunk at the ol' flower shop"~ Homer Simpson
Http://nomad.cz28.com
Need to Buy stock Throttle Bodies...Email me
'95 White Z-28 T-Tops
Cold Air Intake, Ported MAF, Ported Heads, B&M shift firmer, !cat, !iat,!egr, Home Made MonoBlade, LT4 Hotcam, Cloyes, Taylor 8.5MM, Comp cams pro magnum rockers, Hooker Long Tubes, True Dual 3" exhaust, CSI Water pump, FastKitteN in the passenger seat ;)

Best ET (Stock): 13.84

Cool. I was going to page you just to make sure it wasn't already sent and I missed it or something. That sucks about your eye, sorry to here that. How long has the cam been in your car? Why's it coming out and what else do I need if I have the rockers already (I mean as far as valve train goes, I already have the electric pump so I would get the Cloyes and a 95 distributor)? Thanks bud!

<font face="Verdana, Arial" size="2">Originally posted by 5LITEREATER:
Cool. I was going to page you just to make sure it wasn't already sent and I missed it or something. That sucks about your eye, sorry to here that. How long has the cam been in your car? Why's it coming out and what else do I need if I have the rockers already (I mean as far as valve train goes, I already have the electric pump so I would get the Cloyes and a 95 distributor)? Thanks bud!</font>

Tracking # 045742345430984 through Fed Ex as usual http://web.camaross.com/bb/smile.gif
Cam has been in there for about 300 miles. I'm removing it since i'm going to try to put in a 406 if things go ok, but this might not be for a month or so.
I am going with the cc306 or something similar http://web.camaross.com/bb/smile.gif

All you would need would be the springs I do believe, which I have also, and will also be coming off. I will have the Twisted Flow pushrods if I have to change the pushrod length.

-Shannon


------------------
"Yep, getting drunk at the ol' flower shop"~ Homer Simpson
Http://nomad.cz28.com
Need to Buy stock Throttle Bodies...Email me
'95 White Z-28 T-Tops
Cold Air Intake, Ported MAF, Ported Heads, B&M shift firmer, !cat, !iat,!egr, Home Made MonoBlade, LT4 Hotcam, Cloyes, Taylor 8.5MM, Comp cams pro magnum rockers, Hooker Long Tubes, True Dual 3" exhaust, CSI Water pump, FastKitteN in the passenger seat ;)

Best ET (Stock): 13.84

Drop me a price and maybe we can work something out http://web.camaross.com/bb/smile.gif! I notice on your webpage your car seems to be on blocks beig modified alot! Awesome to see a tear down pic. I had a friend's 95 looking like that.

<font face="Verdana, Arial" size="2">Originally posted by 5LITEREATER:
Drop me a price and maybe we can work something out http://web.camaross.com/bb/smile.gif! I notice on your webpage your car seems to be on blocks beig modified alot! Awesome to see a tear down pic. I had a friend's 95 looking like that.</font>

Well, it's looking like it's gonna come out next weekend. I'll be able to tell you if it's in good condition or not. The springs are fine, I'm just worried that the cam is scarred up. What does a new hotcam and springs go for these days ? It's only got 300 miles on it, and they were easy miles too.

I'm going to be selling the short block and heads also if you know anyone interested.

I'm gonna have more pics up this weekend after I get on DSL. This dial up is just way to slow to update http://web.camaross.com/bb/smile.gif

-Shannon


------------------
"Yep, getting drunk at the ol' flower shop"~ Homer Simpson
Http://nomad.cz28.com
Need to Buy stock Throttle Bodies...Email me
'95 White Z-28 T-Tops
Cold Air Intake, Ported MAF, Ported Heads, B&M shift firmer, !cat, !iat,!egr, Home Made MonoBlade, LT4 Hotcam, Cloyes, Taylor 8.5MM, Comp cams pro magnum rockers, Hooker Long Tubes, True Dual 3" exhaust, CSI Water pump, FastKitteN in the passenger seat ;)

Best ET (Stock): 13.84

Any news on the cam?