|
||
help?! (brakes)mab1436 10-18-2003, 03:12 PM im doin my brake pads today, and i took the 2 screws outa the back of the caliper (the 2x 12mm screws on the top and the bottom) and my caliper wont come off or rotate back its like stuck to the rotor?? im lost, please help :( Slappy3243 10-18-2003, 03:35 PM You are talking about the screws that hold the whole caliper itself right? Sometimes you just have to rotate the rotor a bit while you pull the caliper away from it. Be careful though as it will dangle from the brake line if you let it go. If we are not on the same page, check this site out. http://www.installuniversity.com Look under install documents and brakes. -Adam mab1436 10-18-2003, 04:41 PM thanks man, rotating the rotor while pullin is wut got it Slappy3243 10-18-2003, 05:52 PM No problem, I ran into the same problem with my brakes when I was doing it. Glad I could help. -Adam | ||