100 shot on a stock motor?

I heard anything over a 90 shot will hurt these motors due to the hyperblow-up pistons. I was planning a 100 shot. Have any of you guys had a problem with a 100 shot and stock motor?

------------------
95 Z28 6 speed Functional SS hood Headers Y-pipe FlowMaster LT4KM 1LE intake below 4:10's SLP shifter 17" Firehawks SLP Clutch & PP
HPP 160 92 Dodge Viper Red

A well regulated 100 shot is viable on a stock bottom end.

So, yes - if you do it right.


~Taylor

My '94 stock short block has serveral 1/4 passes on the 150 shot and a couple of the 175 shot with no problems.

As long as it's setup correctly and with the safety features, especially a bigger fuel pump. I've ran a 100 shot with the stock fuel pump and my car runs great.

Jody J.

a buddie of mine ran a 200 on his 96 impalla for 2 yrs (wet kit nx) thing still runs great but he's putting better pistons in for a bigger shot

I ran a 200 shot on my stock motor before a main bearing spun (not nitrous related). You'll be fine.

------------------
White 95 Z28 383 TH400 N2O

www.baylor.edu/~Eric_T_Evans/mycar.htm (http://www.baylor.edu/~Eric_T_Evans/mycar.htm)

I had a 75 shot on my car for about 6 monthes, used probably about 2 bottles through the motor. It was fast, but the motor wanted more, so its now at 125, no problems.

------------------
Scott Parkinson
2001 Sunset Orange Z-28
SLP Loud Mouth, K&N, Mass Air, 160 Thermistat, Power Programmer, All aftermarket suspension/braces, 8.5mm Plug Wires, 125 hp Shot. Runnin low 12's all day.

<font face="Verdana, Arial" size="2">Originally posted by JodyJ:
My '94 stock short block has several 1/4 passes on the 150 shot and a couple of the 175 shot with no problems.
</font>

Ditto for me. http://web.camaross.com/bb/biggrin.gif



------------------
<A HREF="http://personal.msy.bellsouth.net/msy/k/r/kraest/derrick.htm" TARGET=_blank>1994 Z28 A4
LT1 Motorsports equipped stock-bottom end LT1, LT1 heads, Hydraulic-Roller Cam, Dope

11.03 @ 125.53 1.61 60ft.
7.08 @ 99.05 1/8 mile</A>

1984 Mustang L
92' 5.0 roller motor, T5, etc.
14.03 @ 100.51 with a spinning 2.29 60ft.

I have a home made 3 stage kit on my 94 Z with 110,000 miles...motor loves it Clutch hates it...lol...BTW my 3 stage is 50 hp off the line, another 75 at the flick of a switch and another 50 at the flick of another switch and yes they all work off of one micro switch...so thats a total of 175hp good for 2.3 seconds and 12mph in the quarter...