|
||
help !!!!!! brakes!!!!1SLOSBC 06-06-2002, 08:22 PM i hear that u can use front calipers on the rear (cars equipped w/4 wheel dics) if u change out the lines.....mainly cause i dont have an e-brake hooked up to my 9 inch anyone done this?? how does it work?? 87DJP2001 06-07-2002, 10:05 AM NO. NO. and again NO. This idea will not work. 1SLOSBC 06-07-2002, 06:17 PM have u tried this method, or know anyone who has.....why no no no? is there a major setback in doing this? any info apprieciated ive been told by a few guys on some boards out there that it will only owrk on 88 model....and will need a proportioning valve to adjust the back brakes from locking up thanks guys 1SLOSBC 07-12-2002, 01:01 AM help!!!!! ------------------ 88 z28 385ci stroker....monster tire shredder 1989gta 07-12-2002, 09:33 AM you have to make room for a larger caliper and the bolt alignment is totally different. I worked in a shop for 5 years and never once saw front calipers that would fit on the rear. you may be able to fab something up but i would be almost positive you will have clearance problems. ebmiller88 07-14-2002, 11:45 AM Why are you trying to do this? Ed 1SLOSBC 07-14-2002, 12:49 PM i have a 9 inch rear, no emergency brake on the car, and i know the rear brakes are adjusted by the e-brake, i have been told that this works on 88 model only, the pads for F/R are the same part.... what ya think? ------------------ 88 z28 385ci stroker....monster tire shredder | ||