Anyone that has bought new fenders please look within
Thread Starter
Registered User
Joined: Dec 2000
Posts: 1,214
From: City of Champions, MA, USA
Anyone that has bought new fenders please look within
I have a set of aftermarket ones on my car right now and I am sick of the crappy fit. Is there any other place than GM to get good fenders without paying an arm and a leg?
------------------
I WOULD RATHER PUSH A CAMARO THAN DRIVE AN IMPORT
1983Z28
Superramed roller 406 10.5 compression, AFR 195's and custom cam.
future mods:
N20 waiting to be installed
Wifes new car:
1995 Z28
AT, leather, T-tops bone stock for now. 250 RWHP 300 RWT 14.0 @ 99 MPH on a 2.2 60'
future mods:
header to tailpipe replacement and a cold air intake. Then I am just going to leave it alone (maybe)
------------------
I WOULD RATHER PUSH A CAMARO THAN DRIVE AN IMPORT
1983Z28
Superramed roller 406 10.5 compression, AFR 195's and custom cam.
future mods:
N20 waiting to be installed
Wifes new car:
1995 Z28
AT, leather, T-tops bone stock for now. 250 RWHP 300 RWT 14.0 @ 99 MPH on a 2.2 60'
future mods:
header to tailpipe replacement and a cold air intake. Then I am just going to leave it alone (maybe)
Thread Starter
Registered User
Joined: Dec 2000
Posts: 1,214
From: City of Champions, MA, USA
I knew someone was going to say that. What is the best price anyone has seen for GM fenders?
------------------
I WOULD RATHER PUSH A CAMARO THAN DRIVE AN IMPORT
1983Z28
Superramed roller 406 10.5 compression, AFR 195's and custom cam.
future mods:
N20 waiting to be installed
Wifes new car:
1995 Z28
AT, leather, T-tops bone stock for now. 250 RWHP 300 RWT 14.0 @ 99 MPH on a 2.2 60'
future mods:
header to tailpipe replacement and a cold air intake. Then I am just going to leave it alone (maybe)
------------------
I WOULD RATHER PUSH A CAMARO THAN DRIVE AN IMPORT
1983Z28
Superramed roller 406 10.5 compression, AFR 195's and custom cam.
future mods:
N20 waiting to be installed
Wifes new car:
1995 Z28
AT, leather, T-tops bone stock for now. 250 RWHP 300 RWT 14.0 @ 99 MPH on a 2.2 60'
future mods:
header to tailpipe replacement and a cold air intake. Then I am just going to leave it alone (maybe)
Registered User
Joined: Jan 2002
Posts: 39
From: Dirty Jersey
where'd you get the aftermarket fenders from? Also, does GM offer lightweight OEM replacement fenders/hoods/quarterpanels?
------------------
1984 Camaro Coupe LG4 V8 (5.0L 305ci)
------------------
1984 Camaro Coupe LG4 V8 (5.0L 305ci)
- 700R4 Transmission
- K&N Filtercharger
Registered User
Joined: Oct 2001
Posts: 580
From: Carleton, Michigan
Are you talking about fiberglass or steel? I am wanting to replace my steel ones with fiberglass.. but I keep getting mixed signals about the fit of fiberglass fenders.
I have been looking at VFN and Unlimited for fiberglass panels
------------------
86 Chevrolet Camaro Iroc Z-28 Fully Loaded With T-Tops
Mods;
Spohn SubFrame Connectors, S&W Race Car Chassis 8 point Roll Cage, 1997 SS Aniversary 3.42 POSI Rear End with 12" Rotors and 4 Piston PBR Calipers, Balanced Drive shaft... Others soon to come...
Best times before any mods done, Complety Stock;15.6 @ 87mph
Waiting for the tracks to open again to see what I got going on Now!
ntimad8.cz28.com
I have been looking at VFN and Unlimited for fiberglass panels
------------------
86 Chevrolet Camaro Iroc Z-28 Fully Loaded With T-Tops
Mods;
Spohn SubFrame Connectors, S&W Race Car Chassis 8 point Roll Cage, 1997 SS Aniversary 3.42 POSI Rear End with 12" Rotors and 4 Piston PBR Calipers, Balanced Drive shaft... Others soon to come...
Best times before any mods done, Complety Stock;15.6 @ 87mph
Waiting for the tracks to open again to see what I got going on Now!
ntimad8.cz28.com
Thread
Thread Starter
Forum
Replies
Last Post
jasonduaine
Parts For Sale
0
Apr 1, 2015 08:09 PM
squarehead
General 1967-2002 F-Body Tech
0
Nov 21, 2014 08:02 PM