|
||
Those who've installed transmission temp guage...Help!Kris93/95Z28 03-29-2003, 09:25 PM I want to install a transmission temperature guage on my 93 Z28, but I don't know how to do this. Where/how do I hook this up? Is there a good write up out there? I want this because I'd like to be able to keep an eye on the transmission if there is a problem I'd like to be able to react. I was planning on using an A-pillar guage pod, and guage.... Thanks for all help. 96z 03-29-2003, 09:32 PM Here you go, this is the guide I used...real easy..http://ken.lowrance.com/projects/TransCooler/ Kris93/95Z28 03-29-2003, 10:14 PM Does the sensor kit come with all the wire that will be needed(Wire that runs from A-Pillar to sensor on line...)? Also how long to install? 95_RipperZ 03-30-2003, 08:22 AM You will need more wiring. Took me about an hour to do just the sensor. BigEvil 03-30-2003, 08:54 AM Definately more wire. Pretty easy install. The sender plugs directly into the tranny, then run your wire. Plug and play! Kris93/95Z28 03-31-2003, 02:28 PM Definately more wire. Pretty easy install. The sender plugs directly into the tranny, then run your wire. Plug and play! Where at in the tranny? Can you take a picture and email me where your is plugged in at? Sorry I'm stupid:D BigEvil 03-31-2003, 03:07 PM You're by no means stupid. Anyway, I'll have that picture for you tomorrow. Kris93/95Z28 03-31-2003, 03:12 PM Thanks!, the e-mail address is: foraker-k-060@mail.mssc.edu THANKS! 95_RipperZ 03-31-2003, 04:10 PM I would like to see a picture of that too. ripper95z@hotmail.com ibanez6rg 03-31-2003, 04:18 PM Originally posted by 95_RipperZ I would like to see a picture of that too. ripper95z@hotmail.com Ditto, if its no problem :) BigEvil 03-31-2003, 05:36 PM No problem, I'll just have to kidnap the digital from my command. I'll send it to you guys tomorrow. White Z 4 Show 04-01-2003, 07:53 AM Can I get a picture of that to? NjoyinXtremes@aol.com or UsiRkeVa@aol.com BigEvil 04-01-2003, 04:56 PM Ok, think that's everyone. If anyone else needs that pic, let me know. Kris93/95Z28 04-01-2003, 06:43 PM Thanks:bow: :bow: :bow: chevy94c 04-01-2003, 06:46 PM BigEvil can you send me that pic too. BigEvil 04-02-2003, 06:41 AM You got it. Z06Z28 06-15-2004, 12:27 AM I'm curious to see what pics you have on the temp guage install. scooby_smokes_doobies@yahoo.com thanks! Kris93/95Z28 06-15-2004, 12:37 AM Originally posted by Z06Z28 I'm curious to see what pics you have on the temp guage install. scooby_smokes_doobies@yahoo.com thanks! Sent you a pic. The pic I sent was where to screw the sensor into on the transmission. The rest should almost be pretty self explanitory... ;) BigEvil 06-15-2004, 01:36 AM Yeah, I'm over off the coast of Iraq, so I don't have access to my pics. Hope the one he sent you helps. 97SS0594 06-02-2006, 01:29 PM anychance of me getting that pic too? plays_cool@msn.com Future_Z_Owner 01-07-2007, 04:27 PM So im doing the tranny temp guage now does anyone have a pic that they could post up? This thread is before this site allowed picture posting. If not, ill post one for anyone down the line that may like to have this info (after im finished of course.) Thanks. Injuneer 01-08-2007, 02:07 PM Do a "search" (which is probably how you found this thread). There was a thread in the past week on the "General......" tech forum, running about 3 pages, that discusses in detail, with photos, the install of a tranny temp gauge, including the semp sensor in the line, wiring, etc. [EDIT] Found the link..... http://camaross.com/forums/showthread.php?t=492346 | ||