Will now split up.....

Selling the top end setup off of my car. All parts aside from pushrods/rockers have less than 300 miles on them.

Ported Stock LT1 heads by LG Motorsports
CC Pro Mag 1.6 Rockers
CC 987 Springs, titanium retainers, hardened locks
2.02/1.60 valves
Hardened pushrods
Comp R lifters
Custom Comp Cam
Port matched intake
AFPR

Heads flow in the 275cfm range. Just went over and had a valve job, checked springs, seals, ect. They are loaded with the best of everything. My full weight car (3600lb) with 9.5 to 1 comp, 230/236 cam, longtubes, 3 in flowmaster cat back, a VERY loose stall (cheapie), 3.70 gears and a generic tune went 12.2@111 first pass with a 1.68 short time. With stock compression and the better cam thats in it now, it should be good for some mid to high 11s in a lighter car if the stall is right. With a power adder the heads work even better! The exhaust side flows quite a bit more than a NA head.

Will now split up.

Assembled Heads/intake minus rocker studs $1100

Comp Pro Mag 1.6 7/16th stud rockers NSA $175

Comp Magnum Pushrods $60

Comp R Lifters $125

Comp Cam custom grind $175

BBK 52mm TB, $200 shipped

Mufflex 4in catback with home made y-pipe/cutouts behind headers. Went 11.0s through the muffler, uncapped it and didnt gain a bit of time. This is the single outlet spintech system. $300 local-ish sale perfered.

Moroso CAI pretty much new $140

1LE Elbow pretty much new $50

4 Chrome TA wheels with 2 new tires, and 2 decent tires. 450 plus shipping

Flowmaster 3in catback, dual outlet, cutout before the axle, with B&B Tri Flow tips. $175

95 4L60E built by Art Carr, many upgrades, plus 2800 non locking converter $600

Will consider some trades, looking for chrome ZR1s with 9.5/11 combo, shorty headers, borla exhaust.

 

have any pics of the flows? if so can u email them

anfballa23@hotmail.com

 

Wont have pictures of anything untill at least thursday.

Kyle

 

Now added, Hooker uncoated LT's, with o2 bungs installed. $225

Kyle

 

I sent you an e-mail on the wheels and tires.

Mark

 

still have the LT's? would you be willing to trade for some 3 month old BBK shorty headers. have fewer than 150 miles on them. i recently installed a bigger cam and im in need of some longtubes. if your willing to trade let me know. it includes the y-pipe.

ps how many miles on the headers and are there dents or anything wrong with them. let me know. thanks

 

I was really looking for some Macs or SLPs, I wasnt very happy with the BBKs I installed/uninstalled on a friends car.

Kyle

 

What are the cam specs?

 

You have PM

Brad

 

redwarrior, I was wrong on the headers, the ones he had were JBA's. Can you get me some pix of the BBKs? Maybe 2 small dents where the primaries meet in the colector, nothing big. Not sure of how many miles on them. They are in great shape tho. Get me some pix and I might be interested! Where are you from?

Shawn, the specs are 227/233, 5.60/.569 lift on a 111 LSA, with 1.6 rockers

Kyle

 

elky, my scanner broke so i really dont have a way of geting you pix of the headers. but i guarantee they are in awesome shape. installing wasnt a problem for me.they have been on my car (which i dont use much) for only 3 months. if your still interested in making a deal let me know by the way im in deep south texas.

 

elguapo, got any pictures? Would there be any way to meet me halfway in dallas next weekend to swap? Ill be down there picking up a motor.

Kyle

 

Kyle, my buddy is coming over Sunday to help me install the jet-hot long-tubes. If everything goes ok, I'll shot you an e-mail about selling my Macs & y-pipe again. If things don't work out with the jet-hots and my new cam, I'll change cams before dumping the jet-hots and going back to Macs.

Mark

 

Kyle, i guess you didnt like the idea of a trade for the headers. im really interested in taking those LTs of your hands. would you do $200 shipped. let me know what you think.

 

110 shipped for the comp R lifters

76653